Select your vehicle
-13%

G2 GM 11.5 Inch Minor Ring and Pinion Installation Kit – 25-2024

G2 Axle and Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • For the Chrysler / GM AAM 11.5 inch rear axle
  • Minor kit: bearings are not included
  • Shims, crush sleeve, pinion nut and pinion seal
  • Part number 25-2024

Description

Overview

The G2 Axle and Gear 25-2024 is a minor ring and pinion installation kit for the Chrysler 11.5 Inches AAM / GM 14 Bolt 11.5 Inches (AAM) rear axle.

The AAM-built 11.5 inch axle is the subject of the 25-2024. G2 supplies a shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound for installs with existing bearings.

On the AAM 11.5 inch rear axle, G2’s 25-2024 minor kit covers the parts that set the gear mesh: a proper shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and marking compound. The master version for this axle, 35-2024, covers 2003-2010 and adds the Timken bearings and races.

Key features

  • Minor kit for the Chrysler 11.5 Inches AAM / GM 14 Bolt 11.5 Inches (AAM) axle (rear)
  • Meant for jobs that keep the existing bearings
  • Shim kit for setting pinion depth and carrier position
  • Pinion nut, crush sleeve and pinion seal
  • Ring gear bolts and silicone sealer
  • Loctite and gear marking compound

Preload and pattern checks

Pinion preload is the setting that keeps the pinion bearings stable under load, and it has to be right before the mesh can be trusted. On a large axle like this one, preload is usually checked with a torque wrench and a dial setup while the pinion nut is tightened in steps. Record the reading at each step so the final setting is repeatable.

After shims and preload are set, the marking compound pattern confirms tooth contact. A pattern that sits too close to the toe or heel points to a depth or position change, and each correction should be checked again. Take the time to do this properly, because the axle is hard to reopen.

  • Use a torque wrench on the pinion nut
  • Record preload readings at each step
  • Recheck the contact pattern after final torque

Specifications

Brand G2 Axle and Gear
Part number 25-2024
UPC 631410094978
Kit type Minor kit
Axle location Rear
Axle type Chrysler 11.5 Inches AAM / GM 14 Bolt 11.5 Inches (AAM)
Axle manufacturer American Axle Manufacturing
Manufacturer part number G/225-2024

Vehicle fitment

It fits the rear Chrysler 11.5 inch AAM axle, also known as the GM 14 bolt 11.5 inch (AAM), built by American Axle Manufacturing.

Confirm your vehicle’s axle type and year before ordering.

Installation notes

This is a large axle with heavy parts, so have lifting help ready and a way to measure pinion preload. Confirm contact with the marking compound.

Before starting the 25-2024 job on the Chrysler 11.5 Inches AAM / GM 14 Bolt 11.5 Inches (AAM) axle, gather a dial indicator, a torque wrench and clean gear oil. Note the old pattern on the teeth, because the shims in the 25-2024 are the means of correcting the new one. The old nut and seal are replaced. Keep races paired with bearings.

What’s included

  • Proper shim kit
  • Pinion nut
  • Crush sleeve
  • Pinion seal
  • Ring gear bolts
  • Silicone sealer
  • Loctite thread locker
  • Gear marking compound

Not included: bearings and gears; the 25-2024 is a minor kit for the Chrysler 11.5 Inches AAM / GM 14 Bolt 11.5 Inches (AAM) axle.

SKU: G/225-2024 Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 12.90 × 12.80 × 3.10 in
brands

Questions & Answers

What axle does the 25-2024 kit fit?

It fits the rear Chrysler 11.5 inch AAM axle, also known as the GM 14 bolt 11.5 inch (AAM). Confirm your axle type and year before ordering.

What is included in the 25-2024 kit?

It includes a shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound.

Does the 25-2024 include bearings or gears?

No bearings or races. Select a master kit when those need replacing. The part number to look for is 25-2024. That applies to the Chrysler 11.5 Inches AAM / GM 14 Bolt 11.5 Inches (AAM) rear axle.

Is a crush sleeve reused on a new setup?

No. The crush sleeve is designed to deform when the pinion nut is tightened, so it should be replaced. Reusing an old sleeve can give a false preload reading and affect bearing life.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon