Overview
The Flaming River FR1519-87P/M is a heavy-duty replacement steering shaft that Flaming River says is designed to completely update the OEM steering system. The company notes factory shafts were never intended to handle bigger tires and body and chassis lifts.
It fits factory or Flaming River columns in manual or power steering setups. Confirm your column type and your vehicle’s year, model and chassis before ordering.
Key features
- Slip and collapse action intended to eliminate binding from chassis flex on and off the road
- Needle bearing style universal joint at the column end
- Slip-universal joint at the steering box end
- 36DD shaft that can be cut to size
- Protective bellow included with the shaft
- Works with factory or Flaming River columns, manual or power steering
Care and inspection
Steering shafts link the column to the steering box and carry the driver’s input through every joint. On a vehicle that has been lifted or fitted with larger tires, the joints and slip section work harder, so their wear tends to show up as play, clunking or a steering wheel that feels loose on center.
Inspect the boot and joints regularly. Look for torn bellows, grease leaks, cracked joint seals and any movement in a joint when you rock it by hand with the vehicle safely supported. Tighten clamps and pinch bolts after the first few trail runs, and recheck them after any suspension work.
Keep the bellow in place and clean. Dirt packed around the slip section can stiffen it, so wipe it down after mud runs and apply grease where the design calls for it. A shaft that binds when turned lock to lock needs checking before further driving.
- Check the bellow for tears after off-road use
- Look for play at both universal joints
- Recheck clamp and pinch bolts after the first trail runs
Specifications
| Brand | Flaming River |
|---|---|
| Part number | FR1519-87P/M |
| UPC | 70000429367 |
| Shaft | 36DD, can be cut to size |
| Column compatibility | Factory or Flaming River |
| Steering type | Manual or power |
| Joints | Needle bearing style at column, slip-universal joint at steering box |
| Protection | Protective bellow |
Vehicle fitment
Match the column connection and steering box end to your vehicle before cutting or installing. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 36DD shaft can be cut to size, so measure the installed length before cutting and do not trim it until the joints line up. Steering is safety-critical, so have the finished installation checked before driving.
What’s included
The shaft, its needle bearing style and slip-universal joints, and a protective bellow are described. No hardware or cutting tools are named.









