Overview
The Omix-ADA 18016.03 is a power steering shaft that Omix-ADA describes as a factory Chrysler replacement part. It is collapsible, with a full extended length of 34 inches.
Confirm fit for your Chrysler model, year and steering setup before ordering.
Key features
- Factory Chrysler replacement design
- Collapsible shaft
- Full extended length of 34 inches
- Attaching bolts are not included
Collapsible shaft basics
A collapsible steering shaft lets the column and steering box move closer and farther apart during a crash or when the front end is serviced, so steering stays connected through the intermediate section. Its travel range matters: a shaft that is too short or too long for the gap between column and box will bind the steering or pull on the joints.
Before installing, measure the gap between the column and steering box at the vehicle’s ride height, then compare it with the shaft’s travel. Lubricate the splines as the design requires, and cycle the shaft through its full travel by hand to confirm it moves without catching. Recheck the bolts after the first drive, since loosened fasteners are a common cause of looseness.
- Check the splines for looseness or grit
- Look for cracks or bends in the shaft tube
- Replace a shaft that binds at either end of its travel
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18016.03 |
| UPC | 804314051402 |
| Type | Power steering shaft |
| Design | Collapsible |
| Full extended length | 34 in |
| Hardware | Attaching bolts not included |
Vehicle fitment
Only a factory Chrysler replacement designation is given, with no model, year or chassis code, so a vehicle match is not confirmed. Check the shaft against your year, model and steering setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Attaching bolts are not included, so confirm the fasteners your installation needs before starting. Since the shaft is collapsible, check that it collapses and extends freely once installed.
What’s included
The shaft. Not included: attaching bolts.









