Overview
The Trail Gear 130084-1-KIT is a universal double-D telescoping steering shaft made of heat-treated steel. It adjusts from 21″ to 27″ and can be cut down to a desired length.
Universal fit is stated, so the shaft is not matched to a make, model or year. Measure your steering box and column before choosing the length.
Key features
- Double-D telescoping design
- Heat-treated steel construction
- Adjustable from 21″ to 27″
- Can be cut to the length you need
Before you cut a steering shaft
A telescoping steering shaft lets the length change slightly as the steering wheel and gear move, so it must slide freely through its full travel. Before cutting, confirm the installed length with the wheel centered and the joints in position. Cutting too short can make the shaft bind at full extension and cause stiff steering.
After cutting, deburr the ends and keep the spline and joint alignment square. Steering shafts often come off the car together with the coupler, the column joint and the u-joints, so inspect those parts when the shaft is replaced.
- Mark the cut line before removing material
- Deburr both ends after cutting
- Check that the shaft slides freely through its travel
- Confirm u-joint angles after reassembly
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130084-1-KIT |
| Shaft type | Universal double-D telescoping |
| Material | Heat-treated steel |
| Adjustable length | 21″ to 27″ |
| Cutting | Can be cut down to a desired length |
| Fitment | Universal fit |
Vehicle fitment
It is a universal design, so the double-D connection and length must suit the steering box and column on your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the installed length before cutting, because the shaft can be cut to your desired length. Check steering operation and free play after installation.
What’s included
Check the package contents against your installation before starting, including any column or steering box needs.









