Overview
The Flaming River FR1758 is a universal billet-joint with a 13/16 -36 end on one side and a 1 DD end on the other. It is a steering joint, so both ends must match the shaft and gear they connect.
Key features
- Billet joint construction
- Universal fit, not tied to one vehicle
- 13/16 -36 end
- 1 DD end
Matching the two ends
Universal billet-joints are sold to fit many setups, so the joint itself does not decide compatibility. The shaft and gear do. Compare the 13/16 -36 end and the 1 DD end with the shaft you have and the gear it turns, and confirm both match before cutting or pressing anything.
Billet joints often run tighter than stamped parts, so check clearance at the shaft and any slip-fit section before final assembly. Clean the bores and splines of burrs, grease and old residue, and use the fasteners and pinch bolts your steering column design calls for. After the first drive, look for play, binding at full lock, and any movement of the clamp.
- Measure the shaft end before buying
- Remove burrs from the bores and splines
- Recheck clamp bolts after the first drive
Specifications
| Brand | Flaming River |
|---|---|
| Part number | FR1758 |
| UPC | 70000359828 |
| Joint type | Universal billet-joint |
| Fitment statement | Universal Fit |
| End one | 13/16 -36 |
| End two | 1 DD |
Vehicle fitment
The joint is universal fit, so it is not tied to one vehicle. Fitment comes down to the two end sizes, 13/16 -36 and 1 DD, matched to your shaft and gear.
A universal fit statement means the joint is not tied to one vehicle; the ends still have to match your shaft and gear.
What’s included
The joint is sold alone. Shafts and hardware are not included, so plan those separately.









