Overview
The Fabtech FTS22107 is a rear 10 inch lift leaf spring for 2008 Ford F-250 and F-350 Super Duty trucks. Confirm the quantity needed for both rear sides before ordering.
The springs use multiple thin leaves to keep lifted height without a harsh ride. Polyurethane bushings, a carrier bearing shim kit and sway bar brackets are included.
Key features
- Rear position
- Designed for a 10 inch lift, with a lift range of 7 and up inches
- Polyurethane bushings included
- Carrier bearing shim kit included
- Sway bar brackets included
Shim kit and driveline checks
A carrier bearing shim kit is used to set the position of the carrier bearing and keep the driveshaft running true at the new axle angle. Shims are a fine-tuning part, so they should be set in place with the springs installed and the truck at its working ride height.
Sway bar brackets carry the sway bar links and should move freely once the lift is in. Inspect them for cracks and bent tabs when the old springs come off, since a bracket that has been stressed for years can fail under a lifted load.
- Check driveshaft angles after the shim kit is set
- Inspect sway bar brackets for cracks or bent tabs
- Look for vibration at highway speed
- Confirm alignment once the new springs settle
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22107 |
| UPC | 674866020757 |
| Position | Rear |
| Lift height range | 7 and up inches |
| Bushings | Polyurethane |
| Included hardware | Carrier bearing shim kit, sway bar brackets |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2008 Ford F-250 Super Duty and 2008 Ford F-350 Super Duty in FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims. Other years and Ford models are not covered.
Other years and other Ford models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lifts of this size change driveline angles, so have the driveline and alignment checked after the springs are fitted. The carrier bearing shim kit is included; read its instructions before installing.
What’s included
Rear leaf springs (quantity given as single spring in one field and pair in another), polyurethane bushings, carrier bearing shim kit and sway bar brackets.








