Overview
The Fabtech Rear Add-A-Leaf and Block Kit, part FTS22044, is a rear leaf spring kit with a long type leaf. It is built for off-road suspension use.
Compatible Fabtech part numbers for this kit are K20392, K20172, K20152, K20152M, K20172M, K20392M, K20152DL, K20172DL, K20182DL, K20392DL and K20162DL.
The kit is designed for off-road use. Confirm the dimensions and leaf count against your existing springs before ordering.
Key features
- Add-a-leaf and block kit for rear leaf springs
- Long type leaf
- Matched to a range of Fabtech leaf spring part numbers
- Designed by Fabtech for off-road suspension
Add-a-leaf kits and ride height
An add-a-leaf adds a leaf to the spring pack, which stiffens the rear and can support more load. A block adds height at the axle and changes the angle at the shackles, so the two work together to raise the rear. The leaf stack, the U-bolts and the shackle geometry all change, so the setup should be checked after a fit.
Look for sag, cracked leaves and loose U-bolts before and after the install, and check the bushings in the shackles. Retorque the U-bolts after the first few drives, since new fasteners settle. A change in height also alters driveline angles and brake hose length, so inspect those at the same time.
- Check U-bolts and nuts after the first drives
- Inspect shackles and bushings for wear
- Look at driveline angles and brake hose length
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22044 |
| Position | Rear |
| Type | Long leaf add-a-leaf and block kit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and chassis before ordering.
Compare the part numbers with the springs you already run before fitting.
What’s included
Check the package contents against your installation before starting.








