Overview
The 23411 is a single 6-inch rear leaf spring with a progressive multi-leaf design for solid axle vehicles. The design is intended to give a smooth ride.
It mounts in the rear position, one spring per unit, with a 6-inch lift. It is a direct fit designed for solid axle vehicles.
Key features
- Progressive multi-leaf design
- 6-inch lift height
- Rear position, single spring per unit
- Designed for smooth ride on solid axle vehicles
Matching springs to the load
A progressive multi-leaf spring is designed to carry load in stages, so it rides softer when the truck is light and stiffens as weight is added. This suits solid axle trucks that carry varying loads. The spring rate matters when the truck carries heavy cargo or tows, so consider how the spring will be used before choosing. Off-road use with a loaded bed puts extra stress on the leaf ends and the center bolt.
Replace rear springs in matched pairs on the same axle, and replace worn bushings, U-bolts and shackle hardware at the same time. Inspect the old springs for sag and broken leaves, and check the bump stops because a lift changes their position. Keep the axle level after installation and recheck torque on the hardware after the first drives.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 23411 |
| UPC | 614901234114 |
| Lift height | 6 inches |
| Position | Rear |
| Spring quantity | Single spring |
| Bushings | Not included, per the specifications |
| Quantity | One spring per unit |
Vehicle fitment
It is designed for solid axle vehicles with a 6-inch rear lift. Confirm your vehicle’s year, model and trim before ordering.
Check the spring against your year, model and trim before ordering.
What’s included
One rear leaf spring per unit.
Not included: Pro-Ride rubber bushings are part of the design, so confirm which bushings you need before installing.








