Overview
The Fabtech FTS22108 is a rear leaf spring for 2008 Ford F-250 and F-350 Super Duty trucks, with a 10 inch lift. Confirm the quantity you need for your install before ordering.
Fabtech credits its thin multi-leaf construction with keeping lifted height while the ride stays comfortable. Polyurethane bushings, a carrier bearing shim kit and sway bar brackets are noted as included.
Key features
- Rear position
- 10 inch lift, lift range 7 and up inches
- Carrier bearing shim kit noted as included
- Sway bar brackets included
- Polyurethane bushings
Lift, driveline and ride
A 10 inch lift raises the rear axle, which changes driveline angles and suspension geometry. Higher angles can cause vibration or wear at the carrier bearing and universal joints if they are not checked after the install. The shim kit helps set the carrier position, so follow its steps carefully and have the angles measured before the truck is driven far.
Sway bar brackets matter on a lifted truck because the bar geometry changes with height. Polyurethane bushings transmit more road feel than rubber, so check them periodically for wear and squeaks. Once the new height is set, consider a review of the shocks, since the ride will feel different at the raised height.
- Check driveline angles after the lift
- Inspect the carrier bearing and shim setup
- Look over sway bar links and brackets
- Re-check hardware after the first drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22108 |
| UPC | 674866020764 |
| Position | Rear |
| Spring quantity | Single spring in one field, pair in another |
| Lift height range | 7 and up inches |
| Bushings | Polyurethane |
| Included hardware | Carrier bearing shim kit, sway bar brackets |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2008 Ford F-250 Super Duty and the 2008 Ford F-350 Super Duty in FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Other years and other Ford models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
A carrier bearing shim kit comes with the spring. Follow the steps for the shim kit during installation, and have the driveline angles and alignment inspected afterward.
What’s included
Rear leaf springs (quantity stated both as single and as pair), polyurethane bushings, carrier bearing shim kit and sway bar brackets.









