Overview
The Fab Fours Lifestyle Winch Front Bumper with Pre-runner Grille Guard, part number JK07-B1850-1, is a winch-ready front bumper for 2 and 4-door models. Fab Fours says its Premium winch bumper focuses on strength and durability, and that it provides more tire clearance to prevent rubbing.
The bumper accepts winches up to 10,000 lb, has 3/4 inch D-ring mounts and comes with Fab Fours’ 90mm fog lights and 60mm turn indicator lights built into its signature injection molded light housings. Fab Fours also lists air ducts among the key features.
Key features
- Winch ready: accepts winches up to 10,000 lb or smaller
- 3/4 inch D-ring mounts
- Fab Fours’ 90mm fog and 60mm turn indicator lights included
- Injection molded light housings in a 1/4 inch boxed mounting system with adjustability
- Pre-runner grille guard
- More tire clearance
- Air ducts
- 3/16 inch steel in 2 stage matte black powder coat or bare steel (-B instead of -1)
Choosing a winch setup
The bumper’s winch capacity is the upper limit, so the winch you pair with it should be rated for your vehicle and the loads you expect to recover. A heavier winch puts more strain on the mounts, so check that the winch bolts and plate are tight after the first few uses. Synthetic rope is lighter to handle, while steel cable tolerates heat and abrasion, and each needs its own care.
Route the winch cable through the fairlead so it lines up straight with the pull, and keep the D-ring mounts free of mud. Use the recovery points correctly, and avoid side loads that bend the mounts. Wiring for the winch should be kept clear of the bumper’s edges and moving parts, and the lights should be checked for secure connections after rough trail use.
- Match winch rating to your vehicle and loads
- Check winch bolts and mounting plate for tightness
- Inspect synthetic rope or steel cable before each recovery
- Keep wiring clear of bumper edges
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | JK07-B1850-1 |
| UPC | 5810101473 |
| Part type | Winch front bumper with Pre-runner grille guard |
| Material | 3/16 inch steel |
| Finish | 2 stage matte black powder coat (-1); bare steel is the -B version |
| Winch capacity | Up to 10,000 lb |
| D-ring mounts | 3/4 inch |
| Lights included | 90mm fog lights and 60mm turn indicator lights |
| Body styles | 2 and 4-door models |
| Winch mount | Included |
| Light mounts | Included |
| Origin | Made in the USA |
Vehicle fitment
It is made for 2-door and 4-door models, so confirm the year and trim for your vehicle before ordering.
Match the part number JK07-B1850-1 to your vehicle’s year, model and trim before ordering.
Installation notes
The 1/4 inch boxed mounting system has adjustability for a custom fit. Fab Fours includes its fog and turn indicator lights in the bumper’s light housings.
What’s included
- Winch bumper with Pre-runner grille guard
- 90mm fog lights
- 60mm turn indicator lights
Not included: a winch.
