Overview
The Fab Fours FF17-H4350-1 is a Premium sensor winch front bumper with a full guard for 2017 to 2018 Ford F-150 trucks, including the Raptor, finished in two-stage black powder coat.
The bumper is built for strength and durability and offers more tire clearance than the factory setup. It accepts a 12,000 lb Warn ZEON winch with a relocation bracket. Fog and turn lights, 7/8-inch D-ring mounts and a two-piece mounting system are included in the design.
Key features
- Winch ready: accepts a 12,000 lb Warn ZEON winch with a relocation bracket
- Full guard
- 7/8-inch D-ring mounts
- Two-piece mounting system with adjustability for a custom fit
- Injection molded Fab Fours light housings
- 90mm fog and 60mm turn indicator lights included
- Two-stage black powder coat
- 3/16-inch steel construction
Preparing the winch setup
A winch mounted on a full guard bumper adds weight high on the front end, so the bumper’s mounts and the truck’s front suspension take more stress during recovery. Plan the winch, relocation bracket and wiring before the bumper goes on. Confirm the winch’s cable length and fairlead position against the bumper’s opening, and keep the hook and cable clear of the lights.
Fog and turn lights draw power from the truck, so route the harness away from heat and moving parts and use a clean, solid ground. Winch recoveries are hard on mounting hardware, so inspect the bolts and bracket welds after each use. Keep the D-ring mounts clean and check their threads for wear before attaching recovery straps.
- Route winch and light wiring separately
- Inspect the relocation bracket after each recovery
- Keep the cable spooled evenly
- Use recovery gear rated for the winch’s load
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FF17-H4350-1 |
| UPC | 5810114862 |
| Type | Premium sensor winch front bumper, full guard |
| Position | Front |
| Width | Full |
| Material | 3/16-inch steel |
| Finish | Two-stage black powder coat |
| Weight | 220-250 lb |
| Fit type | Direct fit |
| Winch mount | Included (12,000 lb Warn ZEON with relocation bracket) |
| D-ring mounts | Included, 7/8-inch |
| Lights | 90mm fog and 60mm turn indicator lights included |
Vehicle fitment
Fab Fours lists FF17-H4350-1 for the 2017 to 2018 Ford F-150 (Raptor).
The 2015 to 2017 and 2009 to 2014 F-150 trucks are outside this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A Warn ZEON winch of 12,000 lb fits with a relocation bracket, so allow for that in the winch setup. Connect the fog and turn lights to the truck’s wiring.
What’s included
- Premium sensor winch front bumper with full guard
- Winch mount
- 7/8-inch D-ring mounts
- 90mm fog and 60mm turn indicator lights
Not included: The winch, the relocation bracket and the winch wiring.
















