Overview
The Fab Fours FF09-D1952-1 is a Vengeance Series pre-runner front bumper for 2009 to 2014 Ford F-150 trucks, with a black powder coat and a non-winch, lightweight steel body.
Compared with the no guard Vengeance bumper, this version adds the pre-runner guard. It keeps the center position for a 20-inch LED light bar, the two 2×2 Dually light mounts on the sides and the lower airflow cutout for intercoolers. It is a steel sensor bumper.
The fit is high and tight, and the lower cutouts give an aggressive look on and off the road. A cleaner front end is available from the no guard option of the same Vengeance design, sold under a different part number. The bumper is complete and bolt-on, and lights are chosen separately by the owner.
Key features
- Pre-runner guard version, 75 lb
- Center position for an integrated 20-inch LED light bar, not included
- Side mounting options for two 2×2 Dually lights
- Lower cutout for intercooler airflow
- Brackets that tie directly to the frame
- Two-stage black powder coat
- 12 ga. U.S. steel
- Non-winch design
Choosing a guard style
A pre-runner guard adds protection across the front of the bumper and changes how the truck feels to drive. It adds weight, so consider how much payload and front-end load matter for your use. A bumper without the guard is lighter and may suit owners who mostly drive on paved roads or light trails.
Light placement follows the same logic whichever guard is chosen. Keep the center light position and side mounts in mind before buying lights, and make sure the wiring can reach them through a fused relay. Check the frame brackets after fitting and again after rough use so the bumper stays secure.
- Compare weight against your typical load
- Plan light placement before ordering lights
- Re-check frame bolts after rough trails
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FF09-D1952-1 |
| UPC | 5810110796 |
| Type | Vengeance pre-runner front bumper |
| Position | Front |
| Width | Full |
| Material | Steel, 12 ga. U.S. steel |
| Finish | Two-stage black powder coat |
| Weight | 75 lb with pre-runner guard |
| Fit type | Direct fit |
| Light mounts | Included |
| Winch mount | Not included |
Vehicle fitment
The listed fitment for FF09-D1952-1 is the 2009 to 2014 Ford F-150.
Later F-150 generations, from 2015, are outside this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt-on using the supplied brackets on the frame. If lights go on the mounts, give them a fused relay and keep the lower opening clear.
What’s included
- Vengeance pre-runner front bumper
- Frame brackets
Not included: The LED light bar and the Dually lights.




















