Overview
The Fab Fours Vengeance Front Pre-Runner Bumper in black, part number CH15-V3052-1, is a lightweight steel, non-winch front bumper for the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD. It is a sensor-compatible bumper with a pre-runner guard, listed with the black powder-coat finish and bolt-on installation.
The Vengeance Series bumper has room for an integrated 20 inch LED light bar in the center and takes two small LED lights on each side. A lower cutout brings airflow to the intercoolers. The fit is high and tight, and it is a complete bolt-on unit with brackets that tie directly to the frame. It is available with no guard or with a pre-runner guard.
Key features
- Vengeance Series non-winch bumper with pre-runner guard
- Sensor compatible; Fab Fours says its sensors are optimized for vehicles with suspension lifts
- Integrated 20 inch LED light bar position in the center, light bar not included
- Side mounts for two 2×2 Dually lights each
- Lower cutout for airflow to the intercoolers
- Complete bolt-on bumper with brackets that tie directly to the frame
- Two-stage black powder coat
- Light mounts included
Lift height and sensor setup
Bumper height changes how a front sensor sees the ground, so a lifted truck and a stock-height truck can need different sensor settings. Measure the bumper’s position to the ground after installation and compare it with the sensor’s mounting height. Small adjustments to the sensor bracket can make a noticeable difference in how the alerts respond.
The lower cutout in a pre-runner bumper helps air reach the intercoolers, but brush and mud can block it. Clean the opening after off-road trips. Frame brackets carry the bumper weight, so check their welds and bolts after the first few weeks and after any hard trail use.
- Recheck sensor alignment after any lift change
- Clear the intercooler cutout of debris
- Inspect frame brackets after hard trail use
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | CH15-V3052-1 |
| UPC | 5810110499 |
| Product type | Vengeance Series front bumper |
| Guard style | Pre-runner guard |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Two-stage black powder coat |
| Sensors | Compatible |
| Light mounts | Included |
| Winch mount | Not included; non-winch bumper |
| D-ring mount | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD.
Other Silverado years and the Silverado 1500 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The sensors are optimized for vehicles with suspension lifts, and stock-height trucks may need the sensor mount tuned with special care. The high, tight fit and the lower cutout both affect how air reaches the intercoolers.
What’s included
The pre-runner bumper with frame brackets and light mounts.
Not included: The 20 inch LED light bar and the 2×2 Dually lights.
















