Overview
The Energy Suspension 4.3145G is a black polyurethane control arm bushing set in half-set form. It is made for vehicles where an aftermarket control arm at the front upper or rear lower location already carries polyurethane bushings, and the set brings the remaining stock arms up to the same material.
Each bushing set is pressed into a stock control arm, so polyurethane sits on all control arms rather than a mix of materials.
Key features
- Black polyurethane bushings for stock control arms
- Half set for vehicles with an aftermarket control arm at the front upper or rear lower location
- Energy Suspension part number 4.3145G
- The bushings are made of polyurethane.
Choosing a bushing material
Polyurethane bushings are firmer than rubber, so they hold alignment and control arm position more tightly. The trade-off is more road feel and vibration reaching the cabin, plus a higher chance of squeaking when the joint dries out. Matching material across the control arms keeps handling consistent from corner to corner.
Because the bushings are pressed into the arms, the arms usually come off first. A press, a clean bore and a lubricant made for polyurethane help the new bushings seat straight. Inspect the bores for wear before pressing, since an oval bore can let the bushing move.
After fitting, check the arms for free movement and recheck the alignment, since new bushings can change the geometry slightly.
- Clean the bore before pressing in the bushing
- Use a lubricant made for polyurethane bushings
- Check the ball joint boots while the arms are off
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 4.3145G |
| UPC | 703639333302 |
| Color | Black |
| Material | Polyurethane |
| Type | Half bushing set |
| Application | Stock control arms at the remaining locations |
Vehicle fitment
These bushings only suit a stock control arm paired with a polyurethane aftermarket arm, so match the arm locations on your vehicle first.
Vehicles without a polyurethane-bushed aftermarket arm at the front upper or rear lower location fall outside this set’s intended use. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fitting this half set means removing each stock control arm and pressing the new bushings in, which generally calls for a press. Secure the vehicle on jack stands before removing any arm.
What’s included
A black polyurethane bushing set for stock control arms, sold under part number 4.3145G.
Not included: control arms. The bushings go into the arms you already have.









