Overview
The Energy Suspension Control Arm Bushing Set in red, part number 3.3180R, is a polyurethane half set for the front end control arms of 1998 to 2000 Chevrolet and GMC full-size vehicles. It fits the K1500 and K2500 Suburban, the Tahoe, the Yukon and the Yukon XL in the trims shown in the vehicle fitment section.
The set is a half set. Its bushings fit the remaining stock front control arms when the vehicle already has an aftermarket arm with polyurethane bushings at the front upper location. The stock arms that stay in place then match the bushing material of the aftermarket part.
The upper arm must reuse all of its hardware, so the existing metal pieces go back in with the new bushings. Polyurethane bushings can improve steering response and control, keep caster and camber steady, and reduce wheel hop.
Key features
- Front half set for stock control arms
- Polyurethane bushings
- Upper arm reuses all hardware
- Red finish
- Direct fit for 1998 to 2000 Chevrolet and GMC full-size vehicles
- Part number 3.3180R
Front half set considerations
A front half set fits the stock lower and upper control arms that remain after an aftermarket upper arm with polyurethane bushings is installed. Full-size trucks and SUVs carry considerable weight at the front, so the arms work hard in steering and braking. Matching the bushing material across the stock arms helps the front end feel more consistent over rough roads and on highway runs.
Before assembly, inspect the existing hardware for wear and corrosion, since it goes back in with the new bushings. Check the ball joints and tie rod ends at the same time, because loose parts elsewhere can mask the benefit of new bushings. A front alignment after the work is a sensible step to confirm everything sits correctly.
- Inspect reused hardware for wear and corrosion
- Check ball joints and tie rod ends together
- Schedule a front alignment after the work
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 3.3180R |
| Position | Front |
| Type | Half set, polyurethane |
| Color | Red |
| Hardware | Upper arm reuses all hardware |
| Fit | Direct fit |
Vehicle fitment
It fits 1998 to 1999 Chevrolet K1500 and K2500 Suburban, 1998 to 2000 Chevrolet Tahoe, 1998 to 1999 GMC K1500 and K2500 Suburban, 1998 to 2000 GMC Yukon, and 2000 GMC Yukon XL 1500 and 2500 models. Model years from 2001 onward, and Silverado and Sierra trucks, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Model years from 2001 onward, and Silverado and Sierra trucks, are not in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Reuse the upper arm’s existing hardware with the new bushings. Installation steps are not covered here, so check the bushing fit before you assemble the arm.
What’s included
The red front control arm bushing half set.









