Overview
The Daystar KT09112BK is a 1.5-inch Comfort Ride suspension lift kit for 1996 to 2002 Toyota 4Runner models. It adds coil spring spacers at the front and rear, along with bump stops and black shock boots, and it is built for 31-inch tires.
Daystar describes its Comfort Ride suspension kits as a way to increase vehicle height and improve performance, with better ground clearance and room for larger tires. The kit is said to use most of the stock components, so the factory parts stay in place while the spacers raise the ride height.
Key features
- 1.5-inch lift height
- Front coil spring spacers
- Rear coil spring spacers
- Bump stops and black shock boots
Driveline and alignment after lifting
A 1.5-inch lift raises the body on coil spring spacers while the springs stay in place, but the driveline still sees a new angle at the joints. Higher ride height shifts the pinion and transfer case angles, which can add vibration if they drift too far. Checking those angles after the work is the simplest way to catch a problem early.
Bump stops and shock boots are small parts with a real job. Bump stops cushion the suspension at full compression, and shock boots protect the exposed shaft from grit and road debris. Inspect both when the suspension is serviced, and replace any that are cracked or hardened. Tires should be checked for rubbing at full steering lock once the new height is set.
- Look for vibration at highway speed after the lift
- Check brake hose length at full droop
- Inspect ball joints and tie rod ends during the alignment
- Recheck torque on spacer hardware after the first drives
Specifications
| Brand | Daystar |
|---|---|
| Part number | DAYKT09112BK |
| Lift height | 1.5 inches |
| Front lift component | Coil spring spacer |
| Rear lift component | Coil spring spacer |
| Tire size | 31 inches |
| Shock boots | Black |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits 1996 to 2002 Toyota 4Runner models in the Base, Limited and SR5 versions.
2003 and later 4Runner models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coil spring spacers raise the body without changing the springs themselves, but a 1.5-inch lift still changes driveline angles and should be followed by an alignment check.
What’s included
The kit includes front and rear coil spring spacers, bump stops and black shock boots.
Not included: Shocks, hardware and installation time are outside this kit. Check your existing hardware before starting.







