Overview
The Rubicon Express 5.5-inch Extreme-Duty Long Arm Lift Kit, part number RE7215, is a complete suspension replacement for the 2003-2006 Jeep Wrangler TJ. It is rated for a lift height range of 5 to 6.99 inches and is sold without shock absorbers.
Longer control arms improve lifted suspension geometry, which gives better stability on and off road, less torque roll and more trail traction than standard short arm lift systems. The kit replaces the factory suspension, so the arms, springs and brake lines are supplied as one system.
The kit also uses PT-Meg Super-Ride bushings, which Rubicon Express designed for on and off-road performance. The arms are chromoly, with adjustable control arms and serviceable Super-Flex spherical ball joints.
Key features
- Chromoly long arms for the TJ
- PT-Meg Super-Ride bushings designed for on and off-road performance
- Adjustable control arms with serviceable Super-Flex spherical ball joints
- Tuned lift springs
- Front and rear stainless steel brake lines
- Three-piece belly pan for transfer case and transmission access
Shock selection for long arms
Shocks are not included with this kit, so they need to be chosen to match the arm geometry and the lift range. Long arms change the angle at which the shock travels, so the mounting points and length should be checked against the new suspension. Shocks that are too short can bind at full extension, while shocks that are too long can limit droop and articulation.
Long arm systems rely on alignment and driveline angles, so have the caster, toe and driveshaft angles checked after installation. Bushings in the control arms should be inspected at regular intervals, and polyurethane or rubber parts should be replaced when they split or show play.
- Confirm shock length and mounting points before buying
- Check caster and toe after installation
- Inspect the driveline angles after the lift
- Inspect control arm bushings at regular intervals
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7215 |
| UPC | 614901441826 |
| Suspension type | Long arm (Extreme-Duty) |
| Lift height range | 5 to 6.99 inches |
| Rear lift method | Coil springs |
| Control arm material | Chromoly |
| Bushings | PT-Meg Super-Ride |
| Ball joints | Super-Flex spherical, serviceable |
| Brake lines | Front and rear, stainless steel |
| Shock absorbers | Not included |
| Fitment | Direct fit |
Vehicle fitment
The kit fits the 2003-2006 Jeep Wrangler TJ. The 1997-2002 TJ years are not covered, and the YJ and JK generations are different platforms that the kit does not fit.
Other Wrangler generations and other Jeep models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit replaces the factory suspension and changes control arm geometry, have the alignment and driveline angles checked after installation. Shock absorbers are not included, so select shocks that match the lifted geometry. The three-piece belly pan can be removed in sections for access to the transfer case and transmission.
What’s included
The long arm system with tuned lift springs, front and rear stainless steel brake lines and the three-piece belly pan.
Not included: Shock absorbers.


