Overview
The Black Rhino Arches 17×8 is a split spoke aluminum wheel with a 5 on 4.5 bolt pattern, sold by Black Rhino Wheels under part number TSW1780ACH305114Z76. It belongs to the Arches series and has a bronze finish, with the title also listing black.
Black Rhino builds this wheel for two kinds of truck and SUV owners. One set-up uses a lower offset for vehicles running an extreme lift and gives the aggressive stance the brand describes. The other is pitched at owners who want a street-friendly look with a mild lift or stock height, and its more positive offset suits that build. This wheel carries an offset of 30, so check the full set of fit numbers against your vehicle before choosing it.
Key features
- 17 inch diameter with an 8 inch width
- Split spoke styling from the Arches series
- 5 on 4.5 bolt pattern
- Offset of 30 and center bore of 76
- Backspacing listed at 5.68
- Aluminum construction with a bronze finish
- Brand copy ties the design to both extreme-lift and street-oriented builds
Choosing the right setup
Wheel setup depends on how the truck or SUV will be used. A wheel with a lower offset moves the mounting face outward, which changes the stance and how the tire sits near the fender. Owners running a taller suspension often pick a lower offset for a wider look, while owners on a near-stock build usually need a more positive offset to keep the tire tucked in and the steering geometry close to factory. Either way, the offset should be chosen with tire size and fender clearance in mind.
Brake clearance matters as much as the face of the wheel. Backspacing decides how far the back of the wheel reaches toward the caliper and suspension, so deeper backspacing needs more room behind the wheel. Check caliper, spring and control arm clearance with the tire you plan to run, and turn the steering lock to lock while the truck is raised to look for rubbing.
Split spoke styling looks best with a finish that matches the rest of the exterior trim, but finish has no effect on fit. Clean bronze and black spokes with a mild wheel cleaner to keep the finish even, and avoid abrasive pads that can dull the clear coat.
- Compare offset and backspacing together rather than alone
- Test steering and suspension travel with the tire installed
- Recheck lug torque after the first drives
Specifications
| Brand | Black Rhino Wheels |
|---|---|
| Part number | TSW1780ACH305114Z76 |
| Series | Arches |
| Style | Split Spoke |
| Diameter | 17 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 4.5 |
| Offset | 30 |
| Center bore | 76 |
| Backspacing | 5.68 |
| Finish | Bronze |
| Construction | Aluminum |
Vehicle fitment
This wheel carries a Universal Fit designation rather than a specific truck or SUV. Wheel fit depends on the bolt pattern, offset, center bore and backspacing working together with your hub and brake clearance. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 76 center bore against your hub, and confirm that the 5.68 backspacing leaves room for your brake calipers and suspension at the offset you choose. Have an installer confirm the lug hardware and torque for this wheel before the vehicle is driven.
What’s included
A single wheel is included. Tires, lug nuts and valve stems are not included.
Not included: tires, lug hardware and valve stems.











