Overview
The Pro Comp PXA5173-21055 is a 20×10 aluminum spoke wheel from the Pro Comp 73 Series Trilogy line, in satin black milled with a 5 on 150 bolt pattern. It is sold as one wheel with a center bore of 110 and an offset of -18.
The 10-inch width and 4.75 backspacing set the tire’s position relative to the mounting face, and the 20-inch diameter means tire size needs careful selection.
Key features
- Low-pressure cast aluminum construction
- Spoke face style
- 20-inch diameter, 10-inch width
- 5 on 150 bolt pattern
- Center bore of 110
- Offset -18 with 4.75 backspacing
Sizing tires for a 20-inch rim
A 20-inch rim leaves less sidewall to absorb bumps, so tire choice matters more than it does on a smaller wheel. Sidewall height changes overall diameter, which affects speedometer reading, gearing feel and the space left at the wheel well. Pick a tire whose overall diameter suits the suspension and the rim width.
Off-road use adds load to the wheel and the hub. Expect more impact at the rim edge on rocky ground, so inspect the bead and the spoke roots after trail days. Wheel spacers and lift changes shift the fit as well, and those should be checked together with the offset when they are added.
- Match tire overall diameter to suspension height
- Inspect the bead seat after rocky trail use
- Check clearance again after adding spacers or lift
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5173-21055 |
| Series | 73 Series Trilogy |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 5 on 150 |
| Center bore | 110 |
| Offset | -18 |
| Backspacing | 4.75 |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not identify a model. A 5 on 150 hub with a 110 center bore is required, and the -18 offset then needs a clearance check against the fender and brake caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use only a five-lug hub at 150 with a matching 110 center bore. Test-fit the 10-inch rim with the chosen tire, because the -18 offset changes where the tire sits relative to the suspension. A five-lug hub on a 150 spacing is required, so confirm the vehicle’s spacing before anything else. The 110 center bore must seat on the hub pilot, and the 10-inch width needs a tire matched to that rim. The -18 offset moves the tire outward, so measure inner clearance at the fender and brake caliper with the tire mounted. The 4.75 backspacing sets how much room the inner lip has behind the mounting face. Recheck after any change in tire diameter or suspension height, and confirm the wheel clears steering components at full lock before the vehicle is used off road.
What’s included
One 20×10 aluminum wheel in satin black milled. Line up the package contents with your installation steps before starting.











