Overview
The Black Rhino Rumble 15×7 is an aluminum wheel with a five on 4.5 bolt pattern, offset 15, backspacing 4.6 and a Gun Black finish. Part number TSW1570RBL155114M76 from Black Rhino Wheels identifies this 15-inch by 7-inch size. The Rumble uses a minimal six-spoke design and follows the Black Rhino Boxer, which Black Rhino introduced in 2018.
The Rumble was designed for drivers who take Ford and Subaru vehicles into off-road rally racing. The 15×7 size suits Subaru models such as the Crosstrek XV, Legacy, Impreza, Forester, Outback and WRX. The 16×7 and 17×8 sizes are also made in this line, so pick the size you need before ordering.
Key features
- Minimal six-spoke design that follows the Black Rhino Boxer.
- Aluminum construction in a 15 by 7 inch size.
- Five on 4.5 bolt pattern.
- Offset 15 and backspacing 4.6 for this size.
- Gun Black finish.
- Subaru models such as the Forester, Outback and WRX suit this size.
- Other finishes in the line: Gloss Gold, Olive Drab Green and Bronze.
Mounting and clearance checks
Installation begins with confirming that the bolt pattern, offset and backspacing all match the vehicle. Offset and backspacing decide how the wheel sits against brake calipers, suspension parts and fenders, so compare them with the planned tire and any brake upgrades. Seat style matters too, because lug nuts that do not fully seat can loosen. Seat the wheel evenly, then torque the nuts in a star pattern.
Clearance is best checked with the vehicle raised and the steering turned to both locks. Rubbing that appears under compression may need a tire change, a different offset or fender trimming. Related parts often replaced with a wheel include lug nuts, valve stems and the center cap if the hub uses one. Inspect the mounting face for corrosion before installing.
- Confirm the seat type of the lug nuts
- Check clearance at full lock and with suspension compressed
- Torque in a star pattern, then recheck after a short drive
- Replace valve stems that show cracking
Specifications
| Brand | Black Rhino Wheels |
|---|---|
| Part number | TSW1570RBL155114M76 |
| Wheel diameter | 15 inches |
| Wheel width | 7 inches |
| Bolt pattern | 5 on 4.5 |
| Offset | 15 |
| Backspacing | 4.6 |
| Finish | Gun Black |
| Construction | Aluminum |
Vehicle fitment
Fitment is not confirmed for a specific year, make or model. Check the 5 on 4.5 bolt pattern, offset 15 and backspacing 4.6 against your vehicle before buying.
The BRZ, Fiesta ST, Focus ST, FRS and STI are named for the 17×8 size, not the 15×7. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Offset and backspacing decide how the wheel sits against the brake calipers, suspension and fenders, so compare them with your vehicle before mounting. Match the lug hardware to the seat style of this wheel, and confirm tire size and load rating before fitting. Have a qualified installer check clearance with the vehicle raised and the steering turned.
What’s included
Lug nuts, center caps and tires are not part of this wheel.
Not included: Tires and mounting hardware are sold separately from this wheel.











