Overview
The Bilstein 5160 Series 25-275124 is a front right remote reservoir shock absorber for the 1998–2007 Toyota Land Cruiser. The reservoir is a separate chamber connected to the shock, and it gives increased cooling capacity and wheel travel.
The unit has a 46mm body and a monotube design for consistent damping. Its valve settings are velocity sensitive and digressive, and they are tuned for each application. Each shock has a 360 degree swivel banjo hose fitting for a low profile installation.
This shock is for the front right corner only, so it is sold as one side of a pair. Check the position marking against the right side of your truck before fitting it. Route the reservoir hose clear of the steering and suspension parts, and compare the mounting points with the damper you are replacing before ordering.
Key features
- Front right position
- Monotube reservoir design
- 46mm body diameter
- Velocity sensitive digressive valve settings
- 360 degree swivel banjo hose fitting
Reservoir hose and routing
The reservoir hose is the part of a remote reservoir shock that most affects installation. It has to run from the reservoir to the shock body without pinching, rubbing or stretching at full steering or suspension movement. A clear route keeps the hose from wearing through, and it lets the shock move freely through its range.
Front corners see the most steering movement, so the hose route should be checked with the wheels turned from lock to lock. Use the existing clips and mounting points where possible, and avoid adding sharp bends. When replacing a unit, compare the old and new hose positions so the reservoir sits where the original layout intended. Recheck the route after the first drives off road.
- Turn the steering fully each way during the fit check
- Keep the hose away from exhaust and heat sources
- Use existing clips to avoid rubbing
- Recheck the route after the first off-road trip
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 25-275124 |
| Shock series | 5160 Series |
| Position | Front right |
| Shock type | Monotube reservoir |
| Body diameter | 46mm |
| Hose fitting | 360 degree swivel banjo |
| Gas charge | Gas charged |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1998 through 2007 Toyota Land Cruiser.
Land Cruiser models outside 1998 to 2007, and other Toyota models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front right remote reservoir shock absorber.
Installation notes
Route the reservoir hose clear of moving parts and confirm the front right position before tightening the mounts.












