Overview
The Baer Brakes 4262094S is a silver Extreme Plus rear brake kit for Ford 8 Inch and 9 Inch rear ends with small bearing housing ends and a 5×5.00 bolt pattern. It pairs a 1-piece monoblock 6-piston, 6S caliper with a 14.0 inch, 2-piece slotted and drilled rotor, and it is a Performance grade kit sold as a complete set.
Baer’s backing plate does double duty: it mounts the caliper and houses a modern 1-piece park brake shoe assembly, so the park brake is part of the kit. Rotors come pre-assembled with NAS high grade stainless hardware, and stainless braided hoses are included. Park brake cables are not included. Because wheel styles vary so widely, Baer does not guarantee fit to every wheel and recommends checking template N085P against the wheel you plan to run.
Key features
- 1-piece monoblock, 6-piston, 6S caliper with a powder coated finish
- Caliper machined from US-sourced 2618 aluminum forging
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual dust, weather and pressure seals
- 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Park brake shoe assembly integrated into the backing plate
- Uses the popular D1247 pad type
Before you buy
A rear disc kit changes more than the rotor. The caliper, backing plate and park brake shoe work as one assembly, so a kit like this usually replaces the whole rear brake setup rather than a single part. Before buying, measure your axle flange, count the lugs and check the wheel clearance you have now, because the caliper and rotor take up space inside the wheel.
Pads are often replaced at the same time as the rotors, since new rotors bed in best against fresh friction material. Park brake cables deserve attention too. If the existing cables are worn or stretched, replacing them during the install avoids a second job later.
- Check wheel clearance before the caliper goes on
- Plan for new cables if the old ones are worn
- Budget for lug nuts and any front rotor work
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262094S |
| UPC | 844165035886 |
| Sold as | Kit |
| Axle flange | Ford 8 Inch/9 Inch Small Bearing |
| Wheel bolt pattern | 5×5.00, 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Caliper | 1-piece monoblock, 6-piston, 6S |
| Caliper color | Silver |
| Caliper material | CNC machined from US-sourced 2618 aluminum forging |
| Pad type | D1247 (FMSI) |
| Rotor outside diameter | 14.0 inch |
| Rotor construction | 2-piece, vented |
| Rotor thickness | 1.25 |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Hose material | Stainless steel |
| Park brake | Included; cables not included |
| Grade | Performance |
| Template | N085P |
| Country of origin | US |
Vehicle fitment
It fits Ford 8 Inch/9 Inch rear axles with a small bearing flange and a 5×5.00 bolt pattern, with a minimum wheel diameter of 18.0 inch. Measure your rear axle against these figures before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables and lug nuts are not in the box, so arrange both before work starts. The rotors and stainless braided hoses are supplied with the kit. Check wheel clearance with template N085P, since the 18.0 inch minimum wheel diameter sets the wheel requirement. Have a technician experienced with rear disc and park brake systems do the installation.
What’s included
Rear brake kit with a silver 6-piston 6S monoblock caliper, 14.0 inch 2-piece slotted and drilled rotors pre-assembled with stainless hardware, a 1-piece park brake shoe assembly in the backing plate, and stainless braided hoses and hardware.
Not included: Park brake cables, lug nuts and front rotor.















