Overview
The Baer Brakes Track4 front brake kit, part number 4261291S, is a silver 4-piston disc brake system for 1970 to 1974 Ford and Mercury models built with drum brake spindles up front. It pairs a T4 caliper with a 13 inch slotted, drilled, zinc-plated rotor and fits the Ford Fairlane, Falcon, Maverick, Mustang and Torino and the Mercury Comet, Cougar, Cyclone and Montego.
The kit is made for cars with OE drum brake spindles, so confirm your spindles before choosing it. Billet aluminum hubs come with premium bearings packed with Redline synthetic grease, and the braided steel hoses, mounting brackets and hardware are included. Exact years and models appear in the fitment section below.
Key features
- T4 caliper in silver, manufactured in Phoenix, Az
- CNC machined from U.S.-sourced forged or billet aluminum
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals guard against dust, weather and pressure
- 1-piece slotted, drilled, zinc-plated rotor
- Billet aluminum hubs with billet dust caps
- Powder coated finish
Upgrading from drum spindles
Converting a front axle from drum brakes to a disc kit changes more than the stopping hardware. The spindle, hub, rotor and caliper work as one assembly, so the replacement parts have to match the spindle geometry and bolt pattern before any other step. Disc brakes generally respond faster and resist fade better than drums under repeated stops, which is one reason owners make this change on older Mustangs and Torinos used for weekend driving.
Wheel clearance and the brake fluid system deserve attention. A larger rotor and caliper can change the space behind the wheel, and a wheel that clears drum brakes may not clear the new caliper. Check the wheel against the template before the car is lifted. Pedal feel can also shift after a front disc conversion, so bleed the system completely and test the pedal in a controlled area before driving on public roads.
- Replace worn wheel studs or bearings while the hub is off
- Inspect rear drums or shoes for wear, since braking balance changes
- Use fresh fluid of the type the master cylinder calls for when bleeding
- Retorque lug nuts after the first short drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261291S |
| UPC | 844165043553 |
| Caliper | T4, 4-piston, fixed, silver |
| Pad type | FMSI D0749 |
| Rotor | 1-piece, vented, slotted, drilled, zinc plated |
| Rotor material | Iron |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Minimum wheel diameter | 17.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50 |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Hose | Braided steel, DOT approved |
| Hubs | Billet aluminum |
| Template | Q082H |
| Emission code | 6 |
| Axle | Front |
Vehicle fitment
This kit fits 1970 Ford Fairlane, 1970 Ford Falcon, 1970-1974 Ford Maverick, 1970-1973 Ford Mustang, 1970-1971 Ford Torino, 1971-1974 Mercury Comet, 1970-1973 Mercury Cougar, 1970 Mercury Cyclone and 1970-1971 Mercury Montego, provided each car has OE drum brake spindles.
Not covered: 1974 Ford Mustang, 1970 Mercury Comet, Ford Torino or Mercury Montego models outside 1970-1971, and Mercury Cyclone after 1970. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting brackets, stainless braided hoses and hardware are included. Wheel clearance matters here: the minimum wheel diameter is 17.0 inch, so check wheels against the Q082H template first. Brake work affects stopping performance, so have the system installed by a qualified technician.
What’s included
Front rotor, T4 calipers, billet aluminum hubs with premium bearings and billet dust caps, mounting brackets, stainless braided hoses and hardware.
Not included: lug nuts.














