Overview
The Baer Brakes 4262688B is a rear Extreme Plus brake system finished in black for the 2012-2018 Ford F-150 and Ford Raptor. A 1-piece Monoblock, 6-piston, 6S caliper mounts to a 15-inch, 2-piece slotted and drilled rotor with zinc plating, designed for 2WD and 4WD trucks that keep the factory park brake.
The kit is specified with the D1247 brake pad type. Rotors come with NAS high grade stainless hardware already fitted, and the kit carries all brackets and hardware. The 15-inch system is said to fit most 19-inch or larger wheels, but Baer cannot guarantee fit with every wheel style, so compare it against template N125U first.
Key features
- 1-piece Monoblock, 6-piston, 6S caliper made in Phoenix, AZ.
- Caliper body CNC machined from 2618 aluminum forging.
- Black powder-coated finish.
- Stainless steel pistons, abutments and noise suppression clips.
- Staggered pistons help reduce uneven pad wear.
- Dual seals guard against dust, weather and pressure.
- Slotted, drilled, zinc-plated 2-piece rotor with billet aluminum hat.
- Rotors pre-assembled with NAS high grade stainless hardware.
Pad and rotor wear checks
Brake wear shows up in a few predictable ways. A pulsing pedal can point to rotor thickness variation, a pull to one side can point to a sticking caliper or uneven pad wear, and a squeal often means the pad wear indicator has reached its limit. Checking pads and rotors at regular service intervals catches these problems before they become costly.
A six-piston rear caliper spreads clamping force across more pad area, which is one reason pad selection matters. Stick with the pad type the kit is built around, and bed in new pads gradually before heavy towing or steep descents. Inspect the brake lines and fittings whenever the brakes are opened, and keep the caliper slides clean and free to move so the pads release evenly.
- Look for scoring or a lip on the rotor edge
- Replace the pads when the wear indicator sounds
- Recheck lug nut tightness after the first wheel removal
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262688B |
| UPC | 844165047452 |
| Caliper | 6S, 1-piece Monoblock |
| Caliper color | Black |
| Caliper type | Floating, 6 pistons |
| Caliper material | CNC machined 2618 aluminum forging |
| Caliper finish | Powder coated |
| Axle | Rear |
| Drive | 2WD, 4WD |
| Rotor type | 2-piece slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor outside diameter | 15.0 Inch |
| Rotor thickness | 1.25 |
| Rotor construction | Vented |
| Min wheel diameter | 19.0 Inch |
| Wheel bolt pattern | 6x135mm |
| Lug count | 6 Lug |
| Pad FMSI number | D1247 |
| Template | N125U |
| Grade | Performance |
| Emission code | 6 |
| Hoses | Reuses OE hoses |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
It fits the 2012-2018 Ford F-150, the Ford F150 12-18 and the Ford Raptor 12-18, in 2WD and 4WD trucks.
Installation notes
Brackets and hardware are included, and the rotors are already assembled with stainless hardware, so no extra rotor hardware is needed. The OE hoses stay in use. Lug nuts are not included, so have six lug nuts ready for the 6x135mm pattern. Confirm wheel clearance with template N125U before fitting wheels, because the system is built around 19-inch or larger wheels. Brake work should be handled by someone experienced with disc brake systems.
What’s included
The kit includes the 6S Monoblock caliper in black, two-piece slotted, drilled and zinc-plated rotors with billet aluminum hats, pre-assembled with NAS high grade stainless hardware, plus all brackets and hardware. The brake pad type is D1247.
Not included: Lug nuts.














