Overview
The Baer Brakes 4302266S is a 14.0 inch Pro Plus rear brake system in silver, sold as a kit for GM small pattern 10/12 bolt bearing-on-axle rear housings with 5×4.75 and 5×5 bolt patterns. It pairs a six-piston fixed caliper with a two-piece slotted, drilled rotor and is made for rear axles with non-flush mount housing ends.
The backing plate serves as the caliper mount and houses a one-piece park brake shoe assembly, so the park brake is part of the rear system. The 14 inch Pro Plus fits most 18 inch or larger wheels. Wheel styles vary and fit to every wheel cannot be assured, so compare the system to your wheel with the template before installing.
Key features
- Six-piston (6P) caliper with staggered pistons to reduce uneven pad wear
- Stainless steel pistons, abutments and noise suppression clips
- Dual dust, weather and pressure seals
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Pre-assembled rotors with NAS high grade stainless hardware
- Integrated one-piece park brake shoe assembly in the backing plate
- Steel braided brake hoses, DOT approved
- Powder coated finish; CNC machined from forged or billet aluminum sourced in the US
Park brake integration
A park brake built into the backing plate means the rear rotor and the parking function share one housing. When a park brake shoe wears, adjustment usually comes before replacement, so check the lever travel during each rear service. Stretched or seized cables are a common cause of weak park braking and are often swapped out alongside the brake hardware.
Larger rotors add weight and more heat capacity. On a 14 inch rotor, the hub and bearing carry more load, so check wheel bearing play and lug tightness during setup. Route hoses clear of the tire and suspension arms so they cannot rub during articulation.
- Check wheel bearing play after the first drive
- Route hoses clear of moving suspension parts
- Retighten lug nuts in a star pattern after the first stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302266S |
| UPC | 844165043188 |
| Sold as | Kit |
| Caliper | 6-piston (6P), fixed, silver |
| Disc brake rotor (rear) outside diameter | 14.0 inch |
| Rotor type | Two-piece, vented, slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Axle | Rear |
| Axle flange | GM small pattern 10/12 bolt bearing on axle (Buick/Olds/Pontiac) |
| Axle housing flange type | Bearing on axle, hybrid |
| Wheel bolt pattern | 5×4.75/5×5.00 |
| Lug count | 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Brake pad FMSI number | D0731 |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included, one-piece shoe assembly |
| Country of origin | US |
Vehicle fitment
The axle flange is GM small pattern 10/12 bolt bearing on axle, used on Buick, Olds and Pontiac rear axles. Check your axle flange, bolt pattern and wheel clearance before ordering.
The kit is for the bearing-on-axle, non-flush housing ends and does not cover axles with a different flange type or bolt pattern. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Source park brake cables separately if your setup uses them, since they are not included. Use the template to confirm wheel clearance before the rotors go on. Brake work is best left to a qualified installer who has confirmed the housing flange matches this kit.
What’s included
The rear brake system: two-piece rotors pre-assembled with NAS high grade stainless hardware, six-piston calipers, the backing plate with park brake shoe assembly, and stainless braided hoses with hardware.
Not included: lug nuts, park brake cables and front rotor.















