Overview
The Baer Brakes 53057-020 is a front Claw performance brake rotor for the 2009–2010 and 2011–2025 Ram 2500 and Ram 3500 trucks, plus the 2012 Ram 1500 Tradesman HD with 8 lug holes. It is a direct replacement for the factory front disc, with a cross-drilled and slotted friction face that helps gas and dust clear from between the pad and rotor during braking.
The bolt pattern is 8x165mm, with a 6.5 mounting bolt hole circle and eight 0.65 mounting holes. The rotor is a floating design with a straight vent pattern and a rust-resistant coating, and its friction surface supports more consistent braking with reduced brake fade. Ram owners fitting a front rotor on a heavy-duty truck can match it by part number, 53057-020.
Key features
- Cross-drilled and slotted friction surface that lets gas and dust escape from the pad face
- Enhanced vane structure built from premium materials for cooling and durability
- Premium, mill balanced direct replacement rotor
- Floating rotor design on a conventional, vented one-piece full-cast body
- Chamfered cross-drilled holes intended to minimize stress cracking
- Zinc-plated finish with a rust-resistant coating
Heavy-duty front brake setup
Heavy-duty front rotors on Ram trucks work with calipers, brake pads and hubs that are sized for the truck’s load. Replacing only the rotor while keeping worn pads or a sticking caliper can cause uneven wear and heat buildup. Matching the rotor to the hub pattern is only part of the job, and the friction pads should be rated for the same work load.
Floating rotor designs allow the disc to move slightly on its mounting hat, which helps it stay flat under heat. The hat itself should be checked for rust and corrosion before fitting, since a corroded mounting face can cause runout. Trucks that use their brakes hard on long descents benefit from keeping the hub and bearings in good order.
- Clean the hub face and mounting surface before fitting
- Check the floating hardware for free movement
- Replace the wheel studs if the threads are damaged
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 53057-020 |
| UPC | 844165033660 |
| Axle | Front |
| Construction | One piece, full cast |
| Material | Cast iron |
| Rotor type | Conventional, vented |
| Vent type design | Straight |
| Floating | Yes |
| Friction surface | Slotted and cross-drilled, directional |
| Disc finish | Zinc plated |
| Rust-resistant coating | Yes |
| Grade type | Premium |
| Outside diameter | 14.17 |
| Overall height | 4.02 |
| Nominal thickness | 1.54 |
| Discard thickness | 1.47 |
| Center hole diameter | 4.84 |
| Mounting bolt hole circle diameter | 6.5 |
| Mounting bolt hole diameter | 0.65 |
| Mounting bolt hole quantity | 8 |
| Stud/lug hole quantity | 8 |
| ABS tone ring included | No |
| Emission code | 6 |
| Warranty | Limited 1 Year Warranty |
| Country of origin | CN |
Vehicle fitment
Covers 2009–2010 Dodge Ram 2500 and 3500 (front), 2011–2025 Ram 2500 and 3500 (front), and 2012 Ram 1500 Tradesman HD (front, 8-lug).
The 3500 entries are for trucks with single rear wheels (SRW), and the 1500 is listed only in the Tradesman HD form with 8 lugs. Other Ram 1500 trims and years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The floating design and the 8 mounting bolt holes mean the 6.5 bolt circle and 4.84 center hole must match your hub exactly before fitting. Check the lug count on the truck first, since the 1500 entry is only for 8-lug trucks. Bed in new pads as the pad maker directs before relying on hard stops.
What’s included
Two direct replacement front rotors are included in the package.
Not included: the ABS tone ring, which this kit does not supply.














