Overview
The Baer Brakes 6919111 is a 13.000 x 1.100 inch left-side replacement brake rotor with a tall hat and a slotted, drilled and zinc-plated friction surface. It is a one-piece full cast cast iron rotor used in certain Baer Track4, SS4 and other Baer Brake systems.
The rotor is directional and specific to the left side of the vehicle. Baer Brakes describes curved vanes for optimum cooling, purpose built castings and dynamic balancing. The specifications list no drum in hat, a 2.781 inch center hole, five lug holes and an overall height of 2.232 inch.
Two lug circle figures appear for this rotor, 4.50 and 4.750 inch, so measure the hub before choosing it. No vehicle, year or chassis code is given for part number 6919111.
Key features
- Slotted, drilled and zinc-plated surface
- Tall hat with no drum in hat
- One-piece full cast construction
- Curved vane design for cooling
- Dynamic balanced for vibration-free performance
- Directional design made for the left side
Hat height and hub fit
The tall hat sets the rotor’s position against the hub face and caliper bracket, so it affects clearance and how the wheel seats. Before ordering, check the hub’s bolt circle and center hole against the rotor, and make sure the hat height suits the spacing in your brake system. A mismatch can cause the wheel to sit off-center or rub the caliper.
Left-side rotors are only for the left hub, and a right-side part will not fit correctly. A slotted, drilled and zinc-plated surface helps shed debris and protect the casting, but it still needs regular inspection for cracks around the slots and holes. Clean the hub face, remove rust and burrs, and check the wheel studs before installing. Confirm lug nut torque after the first few drives.
- Compare hat height with the old rotor
- Check both bolt circles against the hub
- Inspect slots and holes for cracks
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919111 |
| UPC | 844165054481 |
| Size (diameter x thickness) | 13.000 Inch X 1.100 Inch |
| Outside diameter | 13.000 Inch |
| Overall height | 2.232 Inch |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.50 and 4.750 Inch |
| Center hole diameter | 2.781 Inch |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Surface type | Slotted, drilled and zinc plated |
| Rotor type | Vented |
| Brake surface | Directional |
| Hat style | Tall hat |
| Drum in hat | No |
| ABS tone ring included | No |
| Axle | Left |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is made for certain Baer Track4, SS4 and other Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering, and check which bolt circle matches your hub.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount only on the left hub, and compare the tall hat height with the rotor it replaces. Because two lug circle figures are given, verify which bolt circle matches your hub before fitting. Have a qualified technician verify the completed brake installation before driving.
What’s included
One left-side replacement rotor, sold as each. Rotors are sold individually, so the right side needs its own part.
Not included: Brake pads, calipers and hub hardware are not part of this item.
