Overview
The Baer Brakes 6929633 is a right-side replacement brake rotor, sold individually, with a slotted, drilled and zinc-plated friction surface. It is a 12.000 in diameter, vented, one-piece full cast rotor built for select Baer Brake systems.
The rotor carries a modified drum and drum lip, and it is a performance grade casting. Check the 5 x 4.75 in bolt pattern and 3.065 in center register against the Baer system you are servicing before fitting it.
Key features
- Right-side rotor, marked directional and specific to one side
- Drum-in-hat design with a modified drum and drum lip
- Slotted, drilled and zinc-plated friction surface
- Curved vane design for cooling and dynamic balancing for smooth running
- Purpose built castings manufactured from premium materials
Preparing a right-side rotor install
Right-side rotors are directional and specific to one side, so confirm the position before removing the old part. Note how the drum and lip sit relative to the hub, then fit the new rotor in the same orientation. Clean the hub and bearing surfaces, and remove any rust that could make the rotor sit off-center.
Drum-in-hat rotors combine a hat section and a friction ring, so wear on the drum lip can affect how shoes or hardware seat. Inspect the drum and lip for cracking and grooves during service, and replace hardware that shows corrosion. Bed in new pads on the replacement rotor before heavy use.
- Confirm the side marking before removing the old rotor
- Clean the hub face and center register
- Inspect drum lip wear at each service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929633 |
| UPC | 90127962534 |
| Sold as | Each |
| Axle | Right |
| Solid or vented | Vented |
| Drum in hat | Yes |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Surface type | Slotted, drilled and zinc plated |
| Brake surface | Directional |
| Outside diameter | 12.000 in |
| Center hole diameter | 3.065 in |
| Nominal thickness | 1.020 in |
| Overall height | 2.406 in |
| Stud/lug hole circle diameter | 4.75 in |
| Stud/lug hole quantity | 5 |
| Grade | Performance |
| Emission code | 6 |
| Notes | Has modified drum |
| ABS tone ring included | No |
| Country of origin | USA |
Vehicle fitment
The rotor is used in select Baer Brake systems, so identify the Baer system before fitting.
Match the right-side position, 12.000 in diameter and 5 x 4.75 in bolt pattern to your Baer system before ordering.
Installation notes
Rotors are sold individually and are specific to one side, so the right-side rotor belongs on the right axle only. The directional surface should be fitted as supplied.
What’s included
One right-side replacement rotor, sold individually.
Not included: a left-side rotor, since rotors are sold individually.
