Overview
The Baer Brakes 6910222 is a left-side, two-piece replacement brake rotor with a 14.000 inch outside diameter. It has a slotted and drilled surface with a zinc plated finish and is made for select Baer Brake systems, including the ES+2 system.
Each rotor is directional, so it is built for one side of the vehicle. Its castings are made from premium materials, with a curved vane design that aids cooling.
Key features
- Two-piece vented cast iron construction with 1.150 inch nominal thickness
- Curved vane design that Baer says is intended for optimum cooling
- Slotted, drilled and zinc plated surface finish
- Directional brake surface specific to the left side
- Dynamically balanced for vibration-free performance
- Designed for rotor stability and resistance to distortion.
Care and maintenance
Brake rotors wear gradually, and the friction face can develop scoring, heat spots or a lip at the outer edge over time. Inspect the surface each time the pads are changed and look for cracks, especially near the drilled holes and slots. Uneven wear between the two sides of an axle is common, so compare both rotors when one is removed.
Slotted and drilled faces are designed to help clear debris and gas, but they also remove some friction material. Keep the pads matched to the rotor and avoid dragging the brakes on long descents, since heat is the main cause of rotor warping and discoloration. Clean the hub and wheel mating surfaces before reinstalling the rotor.
- Check for cracks near drilled holes
- Compare both sides of the axle when servicing
- Keep hub mating surfaces clean
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910222 |
| UPC | 844165012016 |
| Axle | Left |
| Construction | Two piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Outside diameter | 14.000 inch |
| Nominal thickness | 1.150 inch |
| Mounting bolt hole circle diameter | 8.50 inch |
| Mounting bolt hole quantity | 12 |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | CN |
Vehicle fitment
No year, make, model or trim is given for this rotor. It is tied to select Baer Brake systems and the ES+2 system, so confirm the Baer system before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor is directional, the left-side unit must go on the left side of the vehicle. Keep the slotted and drilled face oriented as the directional design intends.
What’s included
One left-side replacement rotor, sold as each.
Not included: an ABS tone ring, so this rotor is fitted without one.













