Overview
The ARB Deluxe Bull Bar 3450060 is a gloss black powder-coated winch bumper made for the Jeep Grand Cherokee ZJ. The winch mount and all necessary hardware come with it, and the bar accepts winches from makers other than WARN.
The bar is built with computer designing, laser-cut parts, mandrel bending and quality welds. Each mounting system is engineered for one vehicle rather than being universal, and the bar weighs about 90 to 100 pounds.
Mounting points for off-road lights and clevis or D-rings sit on the bar, along with amber driving lights and 1-7/8 inch diameter tubing that protects the fender and grille.
Key features
- Gloss black powder coat finish
- Integrated winch mount with all necessary hardware
- Mounting points for off-road lights and clevis or D-rings
- Amber driving lights
- 1-7/8 inch diameter tubing for fender and grille protection
- Mounting system engineered for the specific vehicle
- Steel construction with D-ring mount
Care after rough trails
A bar with a built in winch mount carries the winch load, so the mounting points need regular checks. The Grand Cherokee ZJ is a heavier vehicle than many older compact SUVs, and the front end works hard when a winch is pulling. After rough use, look at the welds and bracket bolts before assuming the bar is fine.
Skid plates and lower guards are often added alongside a bull bar. A skid plate protects the engine and transmission from rocks and does not replace the bar’s job of protecting the front. Check that any plate clears the bar’s lower section and the front crossmember before buying one.
- Inspect welds after hard recoveries
- Recheck bracket bolts after trail use
- Confirm skid plate clearance before buying
- Keep the winch cable and fairlead clean
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 3450060 |
| UPC | 837290001376 |
| Product type | Front bumper (bull bar) |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Gloss black powder coat |
| Tubing | 1-7/8 inch diameter, for fender and grille protection |
| Winch mount | Included, with hardware |
| Light mounts | Included |
| D-ring mount | Included |
| Fit type | Direct fit |
Vehicle fitment
It is made for the Jeep Grand Cherokee ZJ, which covers 1993–1998 models.
Later Grand Cherokee generations such as the WJ are not covered by the ZJ name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The winch mount comes with the hardware it needs, so a winch can be fitted once the bar is mounted.
What’s included
- Bull bar front bumper, gloss black powder coat
- Winch mount with mounting hardware
- Light mounts and D-ring mount
Not included: A winch.














