Overview
The Deluxe Winch Bar 3450420 is a steel front bumper with a winch mount, made for 2014-on Jeep Grand Cherokee (WK2) 4×4 models. It fits the 2014–2016 Grand Cherokee (WK).
The bar was engineered from the ground up, and its fit was checked across several WK2 configurations for models after 2014. A split pan clears the factory radar and gives access to the winch handles.
Key features
- Durable steel construction
- Vehicle specific design
- Split pan that accommodates the factory radar
- Access to winch handles through the split pan
- Tow point on the right hand side mount
- Winch mount, light mounts and D-ring mount
Radar and winch access
A vehicle specific bar has less room for error than a generic one, and the split pan around the factory radar is where fit matters most. Keep the pan clean so the radar face is not blocked by mud or road debris. After fitting, check that the radar sits in the same position and that nothing rubs against it during steering.
The winch handle access through the split pan is useful when a winch is mounted. Use the handles from the opening rather than reaching around the bar, and keep the cable path clear of the radar area. The right hand tow point should get the same care as the winch: inspect the bolts and bracket welds after heavy pulls.
- Clean the radar face through the split pan
- Check that the radar sits square after fitting
- Keep the cable clear of the radar area
- Inspect the right hand tow mount after pulls
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 3450420 |
| UPC | 9332018027351 |
| Product type | Front bumper (deluxe winch bar) |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Powder coat |
| Winch mount | Included |
| Light mounts | Included |
| D-ring mount | Included |
| Fit type | Direct fit |
| Vehicle design | Vehicle specific, 4×4 models |
Vehicle fitment
The bar is made for the 2014–2016 Jeep Grand Cherokee (WK) in 75th Anniversary, Laredo, Limited, Overland, SRT and Summit trims, and it is designed for 2014-on 4×4 models.
Other Grand Cherokee generations are not covered by this WK2 bar. Model years after 2016 are not on the list for this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The split pan is shaped around the factory radar, which stays in place, and the winch handles can be reached through it.
What’s included
- Deluxe winch bar front bumper
- Winch mount
- Light mounts and D-ring mount
Not included: A winch.









