UTV Lighting & Whips
Showing 25–36 of 44 resultsSorted by popularity
-
-
UTV Light Mounts,Wires and Harnesses
Assault Industries Light Bar Bracket Kit (1.5″) – 101005MC09011
UTV Light Mounts,Wires and HarnessesAssault Industries Light Bar Bracket Kit (1.5″) – 101005MC09011
- Assault Industries light bar bracket kit, 1.5-inch, part number ASI101005MC09011
- Two brackets, four clamps, two logo plates and installation hardware
- Brackets are reversible, shifting mounting position by roughly 1/2 inch
- Confirmed with 39 to 40-inch light bars from several makers
SKU: ASI101005MC09011 -
UTV LED Whips
Oracle Lighting Off-Road LED Whip (4 Foot) – 5781-333
- Universal fit 4 foot LED whip for ATV, UTV and off-road vehicles
- Part number 5781-333, UPC 578133320154
- Polycarbonate tube for resistance and flexibility
- Rated 50,000 hour lifespan with a 12 month warranty
- Antenna-style mount, usable as a safety or warning light
SKU: ORC5781-333 -
-
UTV LED Whips
Gorilla Whips LED Xtreme Large Undermount Kit – LEDUND1001
- Universal fit RGB LED glow kit from Gorilla Whips for UTVs, ATVs, RZRs and motorcycles
- Part number LEDUND1001, UPC 700007450361
- 20 built-in color options and 19 mode settings, controlled by a 17-key wireless remote
- Includes control box, 12-1 custom molded connector and mounting hardware
SKU: G/WLEDUND1001 -
-
Why UTV lighting is its own category
UTVs often come with modest headlights, and they run in dust, dunes, woods and darkness where being seen matters as much as seeing. The parts here fall into three groups: whips for visibility, light bars and cubes for illumination, and mounts and wiring to install them.
LED whips
A whip is a flexible, tall antenna-style pole with an LED strip or lit tip. It lifts a light above the vehicle so others can spot you over dunes and brush, and many carry a flag as well. Listings give the length in feet, such as four or six feet, and the connector type. Common mounting options are threaded bases and quick-release bases that let you remove the whip. Colors vary, and some use several light modes.
Light bars and cubes
Bars and cubes are LED lamps used for forward lighting. Beam pattern is the main choice. Spot beams reach far down the trail, flood beams spread wide light at short range, and combination patterns mix the two. Dual-row bars and compact cubes also differ in size, power draw and where they fit on a roll cage, windshield frame or bumper.
- Beam pattern: spot, flood or combo.
- Output and power draw: check amperage against your wiring.
- Ingress protection rating for dust and water.
- Mount style and whether hardware is included.
Mounts, wires and harnesses
A mount has to hold the light firmly against vibration, and many are vehicle- or cage-specific. Harnesses typically include a relay, a fuse and a switch, which is the right way to power high-draw lights. Using properly sized wire, a fused circuit and sealed connectors prevents shorts and voltage drop.
Installation notes
Plan the cable route away from heat and moving parts, and use grommets where wires pass through metal. Disconnect the battery before wiring, and cover any exposed splice with heat-shrink. Aim lights so they do not blind riders or drivers ahead, and switch off auxiliary lighting around others. Rules on lighting for off-highway vehicles vary, so check local regulations and any trail-system requirements.
Fitment
Confirm that mounts and harnesses suit your exact UTV model and year, and review the manufacturer's specifications for the power draw of each light.
Choosing wisely and avoiding mistakes
Match the whip length to where you ride. Longer whips are easier to spot over dunes, but they can catch on low branches and overhead obstacles, so choose shorter ones for wooded trails. Pick a mount with the right thread, and check the flag or lens for UV resistance.
- Do not exceed the amperage rating of the switch or the harness.
- Do not aim bars at eye level of oncoming riders.
- Do not rely on one wire connection without a fuse.
Maintenance
Check wiring and mounts after rides because vibration loosens connectors. Wash dust from lenses with water and a soft cloth. Seal exposed connectors with dielectric grease. Inspect the whip's base for cracking, particularly after a rollover or a branch strike.
If you ride in groups, agree on whip and light colors in advance, since consistent signals make it easier to keep track of one another at dusk or in dust.
Popular UTV Lighting & Whips brands
- Gorilla Whips (14)
- Buggy Whip (12)
- Rigid Industries (6)
- Quick Light (3)
- Pro Armor (3)
- Axia Alloys (3)
- Rugged Ridge (1)
- Baja Designs (1)
- Oracle Lighting (1)
- Assault Industries (1)
Shop UTV Lighting & Whips by type
UTV Lighting & Whips FAQ
What is a UTV whip light for?
A whip raises a lit pole and often a flag above the vehicle so others can see you over dunes, brush or terrain crests. It is a visibility aid rather than a main light for seeing the trail.
Do I need a relay for a UTV light bar?
A relay is strongly recommended for higher-draw lights. It lets a small switch control the load and protects the switch and wiring. A harness with a fuse and relay is the safest approach.
What is the difference between spot and flood beams?
Spot beams are focused and reach farther, which suits fast trail driving. Flood beams spread wide at short range, useful for slow, technical areas. Combination bars mix both patterns.
Are UTV lights street legal?
Not necessarily. UTV lighting rules vary by state and by whether you are on a trail or a public road. Check local regulations and trail rules before using auxiliary lights on public roads.









