Select your vehicle

Bumper Lighting Mounts under Light Mounting Brackets & Cradles collects the brackets that carry an LED light bar or cube lights in or on a front bumper. Rigid Industries supplies center and lower bumper mounts for 20 and 30 inch SR-Series and E-Series bars on GM and Ford trucks, Go Rhino makes light plates and bar mounts for its BR and BRJ40 bumpers on the Wrangler JK, and Rugged Ridge and N-Fab offer factory-bumper light bars for the JK and Toyota 4Runner. Lights are not included.

Showing 1–12 of 21 resultsSorted by popularity

Why mount lights at the bumper

A bumper-mounted light bar sits low, out of the driver's eye line, and does not reflect off the hood the way a roof bar does. It is also hidden enough to keep a truck looking stock. The downside is that a low light is first in line for mud, rocks and brush, and it lights the ground close to the vehicle rather than far down the trail. For many trucks, a 20 or 30 inch bar in the lower bumper opening is the practical compromise between a pair of fog pods and a roof rack full of lights. The mounts here hold a specific bar length in a specific bumper, so plan both together.

Factory bumper mounts

Rigid's center and lower bumper mount kits for Chevrolet and GMC trucks and the Ford Super Duty hold one 20 inch E-Series or SR-Series bar, or a 30 inch SR-Series bar, in the lower grille opening. They are laser cut from stainless steel, powder coated black, and bolt to existing holes with no drilling. The N-Fab LBM bumper mounts for the 2014 to 2018 4Runner and 2007 to 2014 GMC HD trucks tuck a bar behind the grille or into the bumper opening, and the Rugged Ridge factory bumper light bar for the 2007 to 2018 Wrangler JK holds three 7 inch or two 10 inch lights above the stock bumper. In each case the listing names the bar size and series; a 20 inch single-row SR bar is far thinner than a 20 inch double-row E-Series bar, so match the series as well as the length.

  • Check the trim list. GM HD trucks differ between Denali, SLE, SLT and WT bumpers-bumpers-tire-carriers-winch-mounts-2 in some years.
  • Confirm the mount leaves room for a factory tow hook or front camera.
  • Look at how the bar is retained: end brackets allow tilt for aiming, a cradle does not.

Aftermarket bumper plates

If you already run a Go Rhino BR5, BR10 or BRJ40 bumper, the light plates and bar mounts here are made for its openings. The BR10 light plate takes Rigid D-Series flush mount lights, the BRJ40 end cap plates upgrade the end cap lights to 4 inch cubes, and the Rockline and Roadline bar mounts bolt a light bar onto the BRJ40 for the two-door and four-door JK. These parts fit the bumper, not the vehicle directly, so verify the bumper model.

Material, wiring and aim

Stainless or heavy mild steel with a textured black powder coat is standard. Look for a finish warranty when the mount sits where salt and gravel hit it. Run the harness with a relay and fused power, route it away from the radiator fan and exhaust, and use a weatherproof connector near the bar so it can be removed. Aim a bumper bar slightly up so the beam reaches down the trail, then check that it does not blind oncoming drivers; most states restrict forward-facing off-road lights to off-highway use, so wire them to a separate switch and cover or disconnect them on the road. Confirm the mount matches your bumper, bar length and series before choosing.

Popular Bumper Lighting Mounts brands

Bumper Lighting Mounts FAQ

Does the mount include the light bar?

No. These are brackets and hardware only. Each listing names the light bar size and series it is designed to hold, such as a 20 inch Rigid SR-Series or E-Series bar, so choose the mount for the bar you own or plan to buy.

Can I use a different brand of light bar on a Rigid mount?

Sometimes. The mount is sized for a specific length and housing depth and uses Rigid's end bracket bolt pattern. Another brand's bar of the same length may fit with its own end brackets if the housing is similar, but check dimensions carefully; there is no guarantee.

Is a bumper light bar legal on the street?

Mounting it is generally allowed, but using forward-facing off-road lights on public roads is restricted in most states, and some require covers when the vehicle is on the highway. Wire the bar to its own switch, use it off road, and check your state and local regulations.

Do I need to drill my bumper to install one of these mounts?

Most factory bumper kits here bolt to existing holes with no drilling or cutting. Go Rhino plates fit the openings already in their bumpers. Universal brackets or mounts for unusual bumpers may need holes, so read the installation notes for your kit.