Twelve current 4X4s judged the overland way: payload, range, clearance, lockers, roof load and aftermarket support, with the numbers from each maker.
Lift Kits, Suspension & Shocks
This section gathers the parts that set how a 4×4 rides, clears obstacles and handles: complete lift kits, shocks, leveling kits, body lifts, steering stabilizers, bushings and air ride systems. It suits owners planning a trail build as well as those replacing worn stock components. Brands include Pro Comp Suspension, Rough Country, Bilstein, Skyjacker and Fabtech. Open a product page for part numbers and features, then compare the products below.

Suspension decides how much tire you can fit, how the rig rides on the highway and how well it keeps its wheels on the ground over rocks. This department covers everything from a one-inch leveling spacer to a full six-inch kit, plus the shocks, springs and arms that make a lift work.
Most shoppers start in one of three places. Complete kits are the simplest path to a set height. Leveling kits and spacers fix factory rake with minimal change. Individual parts such as coil springs, control arms, steering stabilizers and air helper springs let you fix one weak spot or finish a build in stages. Note the lift height and tire size each kit is designed around before comparing.
Shop suspension by type
Popular suspension parts
-
-
Shock Absorbers & Shock Accessories
Pro Comp PRO-X Twin Tube Shock Absorber – 929505B
- PRO-X twin tube shock, 29.8 in extended and 17.3 in collapsed length
- Gas charged and nitrogen stabilized, with 10 stage velocity sensitive valving
- 5/8 in chrome hardened shaft and 1-3/8 in nylon banded piston
- Fits Chevrolet Avalanche, Silverado and GMC Sierra trucks and the 2013-2021 Ram 3500
- Sold individually; shock boot sold separately
SKU: EXP929505B -
Control Arms
Pro Comp Pro Series Front Upper Control Arms – 52003B
- Pro Series front upper control arms for the 2019-2021 Ford Ranger
- High angle ball joint on tube arms
- PTMEG bushings and helix grooved pivot points
- Sealed dust cap for long-term quiet pivot performance
- Part number 52003B
SKU: EXP52003B -
-
-
-
Steering Stabilizers
Pro Comp PRO-M Steering Stabilizer – PR2904
- Fits the 2005 to 2018 Ford F-250 and F-350 Super Duty and the 2008 to 2012 and 2018 Dodge Ram 2500 and 3500
- Monotube design with a 14mm chrome hardened shaft
- Extended length 22.8 inches, collapsed length 14.6 inches
- Mounting brackets not included
- Part number PR2904, zinc finish
SKU: EXPPR2904 -
Leveling Kits
4 Wheel Parts Factory Bronco Level Lift Kit – 62210K
- Level lift for the 2021 to 2026 Ford Bronco with 2 inches of front lift
- Aluminum coil spring spacers at the front and rear
- Clearance for tires up to 35 inches
- No track bar drop and no bump stops included
- Part number 62210K, black finish
SKU: 4WP62210K
Suspension sizing reference
Ranges below come from the kits and parts in this department. Always check the specific listing for your vehicle, since the same kit name can differ by model year and drivetrain.
How the lift methods compare
| Typical lift | What it changes | |
|---|---|---|
| Leveling kit or spacer | 1–2.5" front | Front ride height only |
| Body lift | 1–3" | Body-to-frame gap, not geometry |
| Suspension lift kit | 2.5–6" and up | Springs, shocks, often arms |
| Lift coil springs | 2.5–7" | Ride height and spring rate |
| Air helper springs | Load support | Sag under load or towing |
Measure before you order
- Wheel center to fender lip at each corner, on level ground
- Current tire diameter and the size you plan to run
- Shock length at full droop and at full compression
- Upper and lower shock mount style (loop, stud or bar pin)
- Front axle or IFS type, cab style and 2WD or 4WD
- Added weight from a winch bumper, armor or camper
Shock construction
| Twin tube | Monotube | Reservoir | |
|---|---|---|---|
| Body | Inner and outer tube | Single tube, floating piston | Monotube plus extra oil volume |
| Heat handling | Good for daily use | Better, larger piston | Best for long fast runs |
| Typical use | Stock to mild lifts | Trail and street builds | Desert and heavy use |
Sample shock and stabilizer specs
| PRO-X shock 929505B extended | 29.8" |
|---|---|
| PRO-X shock 929505B collapsed | 17.3" |
| PRO-X stabilizer travel | 7.18–10.74" |
| PRO-X stabilizer body diameter | 1.75–2.36" |
| PRO-VST coilover body diameter | 2.5" |
| Common mount styles | Loop, stud, bar pin |
Air support in this range
- Air Lift LoadLifter 5000 and 5000 Ultimate rear air spring kits
- Firestone Ride-Rite helper spring kits and Coil-Rite in-coil air helpers
- Firestone Air Command kits for onboard inflation
- AirLift 1000 replacement bags (5–50 PSI, no lines or fittings)
- Tuff Country air bag adapters for lifted trucks
A taller lift can push headlight and bumper heights past state limits. Check your local rules before you pick a height.
All Lift Kits, Suspension & Shocks 3,785 parts
-
Coil Springs
Rock Krawler 3.5 Inch Lift Heavy-Duty Coil Springs
- Rock Krawler 3.5 inch heavy-duty rear coil spring, part number RK02002
- Fits 2007–2016 Jeep Wrangler JK, two- and four-door models
- Preset to minimize settling, shot peened and powder coated black
- Actual lift varies with vehicle accessories and axle positioning
SKU: RKSRK02002 -
Coil Springs
Rock Krawler 3.5 Inch Lift Heavy-Duty Coil Springs
- Rock Krawler 3.5 inch heavy-duty front coil spring, part number RK02001
- Fits 2007–2016 Jeep Wrangler JK, two- and four-door models
- Preset to minimize settling, shot peened and powder coated black
- Actual lift varies with vehicle accessories and axle positioning
SKU: RKSRK02001 -
Coil Springs
ARB Old Man Emu Coil Spring – 2936
- Heavy load Old Man Emu coil spring for the 1999–2001 Jeep Cherokee XJ and 1999–2004 Jeep Grand Cherokee WJ
- Part number 2936, UPC 9319092023516
- Cherokee covers Classic, Limited, SE and Sport; Grand Cherokee covers Laredo, Limited, Overland, Special Edition and Sport
- Designed for control under a heavier load
SKU: ARB2936 -
-
-
Coil Springs
ARB Old Man Emu Coil Spring – 2922
- Medium duty Old Man Emu coil spring for R50 generation Nissan Pathfinder and 2004 Pathfinder Armada
- Part number 2922, UPC 9319092023370
- Fits Pathfinder LE, SE and XE trims, plus Armada LE and SE trims.
- Designed for control and ride comfort under a load
SKU: ARB2922 -
Start with the goal for the truck
Suspension work is a chain of decisions, and the first one is what the vehicle will do most. A daily driver that sees weekend trails needs a different setup than a dedicated rock crawler or a desert runner. Write down the tire size you want, how much lift you can live with, and whether you tow or carry heavy loads. Those three answers narrow the field quickly.
The catalog is broken into several families that serve different goals:
- Complete lift kits bundle springs, shocks, brackets and hardware sized to one lift height.
- Leveling kits raise the front a modest amount to remove factory rake.
- Body lifts add spacers between body and frame without changing suspension geometry.
- Shocks, stabilizers and bushings refresh or tune an existing setup.
Lift kit versus component upgrade
A complete kit is convenient because the pieces are designed to work together, and many list the lift height range, shock series and rear lift method (add-a-leaf, blocks or springs) right in the title. Buying components separately gives more control but puts the burden of matching spring rates, shock lengths and travel on you. Taller lifts often need extra parts such as drop brackets, longer brake lines, track bars, control arms or driveshaft changes, so read the kit contents carefully for what is and is not included.
Key things to compare
- Lift height range and whether it is measured at the front, rear or both.
- Shock type: twin-tube, monotube or reservoir, and whether shocks are included.
- Spring type and rate, particularly if you carry a winch, bumper or camper.
- Rear lift method, such as blocks, add-a-leaf or new springs.
- Fitment: confirm the exact year, make, model, cab style and drivetrain.
Installation and alignment
Lifting a vehicle changes ride height, driveline angles, brake line length and steering geometry. Professional installation is recommended for most buyers, and every lift should be followed by a wheel alignment. Torque suspension fasteners to the manufacturer's specification, ideally with the vehicle at ride height so bushings are not preloaded. Recheck torque after the first few hundred miles. Bigger tires may also call for re-gearing and a speedometer recalibration.
Compatibility and local rules
Always verify fitment for your exact vehicle and review the manufacturer's specifications before choosing. Height limits for bumpers-bumpers-tire-carriers-winch-mounts-2, headlights and bodies vary by state, so check local regulations before committing to a tall lift.
Common pairings and mistakes
Lift kits rarely work alone. Larger tires often call for wheel offset changes, a steering stabilizer, and sometimes re-gearing. Matching shocks to the actual lift height is important, because a shock that is too short limits travel and one that is too long can hit its internal stops.
- Do not mix a tall lift with stock brake lines or limiting straps.
- Do not skip bushing and ball joint inspection before adding new parts to an old front end.
- Do not assume a leveling kit and a lift kit can be stacked without checking the maker's limits.
Inspection and upkeep
After installation, recheck fasteners after the first 100 miles or so, then at each oil change. Look for torn boots, leaking shock bodies, cracked bushings and loose U-bolts. Suspension that has been lifted needs more regular attention than a stock setup, particularly when used off-road.
Related guides
- The Best Modern 4X4s for Overland Travel
- Wrangler vs Bronco vs 4Runner: The Engineering Compared
Wrangler, Bronco and 4Runner compared on frames, axles, transfer cases, crawl ratios, lockers, travel and angles, using each maker's own spec sheets.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Lift Kits, Suspension & Shocks brands
- Pro Comp Suspension (671)
- Rubicon Express (292)
- Skyjacker (244)
- ARB 4x4 Accessories (243)
- Rough Country (242)
- Fabtech (210)
- Bilstein (171)
- TeraFlex (154)
- Energy Suspension (150)
- ICON Vehicle Dynamics (149)
- Daystar (147)
- Crown Automotive (133)
Lift Kits, Suspension & Shocks FAQ
How much lift do I need for 35-inch tires?
It depends on the vehicle and wheel offset. Many trucks need roughly 4 to 6 inches of lift, or a smaller lift paired with trimming, to clear 35s. Check the kit maker's tire-size guidance for your exact vehicle.
Is a leveling kit the same as a lift kit?
No. A leveling kit usually raises only the front to match the rear, giving a small gain. A lift kit raises both ends and often changes shocks and other components. Leveling kits are simpler but give less clearance.
Do I need new shocks with a lift?
Usually yes. Taller ride height needs longer shocks to keep full travel and avoid overextending brake lines and limiting straps. Many complete kits include shocks matched to the lift height; confirm this in the listing.
Do I need an alignment after installing a lift?
Yes. Changing ride height alters alignment angles such as caster and toe. An alignment after installation protects tires and keeps steering predictable. Some larger lifts also need adjustable control arms or track bars to bring angles back in range.























