Select your vehicle
-13%

Rock Krawler 3.5 Inch Lift Heavy-Duty Coil Springs

Rock Krawler

Shop Jeep Wrangler JK Coil Springs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rock Krawler 3.5 inch heavy-duty rear coil spring, part number RK02002
  • Fits 2007–2016 Jeep Wrangler JK, two- and four-door models
  • Preset to minimize settling, shot peened and powder coated black
  • Actual lift varies with vehicle accessories and axle positioning

Description

Overview

The Rock Krawler RK02002 is a rear heavy-duty coil spring for the 2007–2016 Jeep Wrangler JK, rated by Rock Krawler at a 3.5 inch lift on two-door and four-door models. It is a rear position part, so it replaces the rear springs rather than the front.

The spring is preset to limit settling, shot peened for stress relief and finished in durable black powder coat. It is sport tuned for comfortable ride quality and off-road use.

Key features

  • Rear position, direct fit for JK Wranglers
  • Heavy-duty coil spring with a 3.5 inch lift
  • Preset construction to reduce settling over time
  • Shot peened for stress relief
  • Black powder coat finish
  • Sport tuned ride and off-road focus

Rear coil and axle geometry

Rear coil springs carry the axle and the rear share of the vehicle’s weight, so a rear lift changes how the whole back end sits. Raising the rear can alter the pinion angle, and that is worth measuring once the new spring is in, since an angle that is too steep can cause vibration. Rear shocks and bump stops often need the same attention, because the rear travel they see changes with the new height.

Rear springs are usually replaced as a left and right pair so the axle sits level. A fresh look at the brake lines and rear track components during the install helps the rear end settle into its new position without surprises.

  • Pinion angle measured after rear lift
  • Rear shock length matched to the new height
  • Bump stops inspected for splits
  • Brake lines checked for slack at the axle

Specifications

Brand Rock Krawler
Part number RK02002
UPC 70000541864
Lift height 3.5 inch
Position Rear
Fitment type Direct fit
Finish Powder coated black

Vehicle fitment

It fits the 2007–2016 Jeep Wrangler JK in the 70th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited versions.

The 2017 and 2018 JK model years and Wranglers from the TJ, LJ and JL generations are outside this fit. Check your year, model and trim against this fit before ordering.

Installation notes

Rear lift springs raise the rear end and can change the driveshaft operating angles, so check the pinion and driveline angles after installation. Actual lift depends on accessories and axle positioning, so take the measurement once the vehicle is equipped.

What’s included

Check the package contents against your installation before starting.

SKU: RKSRK02002 Category:

Specification

Shipping weight 30.00 lbs
Package dimensions 24.00 × 12.00 × 8.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201670th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the Rock Krawler RK02002 a rear spring?

Yes. It is a rear position spring for the 2007–2016 Jeep Wrangler JK. A front spring is a separate part, so check the position you need before fitting.

Will the RK02002 fit a 2010 Jeep Wrangler JK?

Yes. It fits 2007–2016 Jeep Wrangler JK models, including two-door and four-door versions, so a 2010 JK falls within the fit. Confirm your trim before ordering.

What lift height does the RK02002 give?

Rock Krawler rates the spring at a 3.5 inch lift. Because accessories and axle positioning change the final height, measure the rear after the truck is set up.

What part number and brand is this spring?

The brand is Rock Krawler and the part number is RK02002, with UPC 70000541864. It is a heavy-duty rear coil spring finished in powder coated black.

Do the rear springs need to be replaced in pairs?

Yes, in most cases. Rear springs are installed as a left and right pair so ride height stays even across the axle. Replacing only one side can leave the rear sitting unevenly.

How can I tell a rear spring is worn?

Look for a rear end that sits lower than the front or looks uneven from side to side. Bottoming out over bumps or a sagging load can also point to a tired spring. Measure both sides with the vehicle on level ground.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Coil Springs on Amazon