Heating & Cooling
Showing 13–24 of 272 resultsSorted by popularity
-
Radiator
Mishimoto Cummins Aluminum Radiator – MMRAD-RAM-89
- Full aluminum replacement radiator, Mishimoto part number M/AMMRAD-RAM-89
- Direct fit for 1990 to 1993 first-generation Cummins Dodge trucks
- Two-row brazed aluminum core with TIG-welded construction
- Includes a High Pressure 1.3 Bar radiator cap
SKU: M/AMMRAD-RAM-89 -
Radiator
Mishimoto Cummins Aluminum Radiator – MMRAD-RAM-10
- Two-row aluminum replacement radiator, Mishimoto part number M/AMMRAD-RAM-10
- Direct factory fit for 2010 Dodge Ram 2500 and 3500 trucks with the 6.7L Cummins
- 100% brazed aluminum core, 19% thicker than the factory radiator
- Includes two rubber mounting bushings and an M12 x 1.5mm magnetic drain plug
SKU: M/AMMRAD-RAM-10 -
Engine Oil Cooler
Mishimoto Black Oil Cooler Kit, Non Thermostatic – MMOC-UHBK
- Non-thermostatic oil cooler kit, Mishimoto part number M/AMMOC-UHBK
- 25-row stacked-plate cooler core with billet anodized aluminum sandwich plate
- Includes 3/4-16 and M20-1.5 sandwich plate adapters for a range of makes and models
- Pre-assembled stainless steel braided lines with -10AN fittings and Dowty seals
- Sold as universal fit, with no specific vehicles named
SKU: M/AMMOC-UHBK -
-
-
Electric Cooling Fan
Flex-A-Lite Dual S-Blade 15″ Electric Fans – 116591
- Flex-A-Lite dual 15-inch S-Blade electric fan kit, part number FLX116591
- Reversible S-Blade design with a full shroud measuring 31 7/8 x 17 inches
- Variable Speed Controller sets fan speed from 60-100 percent
- Moves up to 6,000 cfm of airflow; universal fit
SKU: FLX116591 -
Electric Cooling Fan
Flex-A-Lite Dual 15″ Electric Fans – 116545
- Flex-A-Lite dual 15-inch S-Blade electric fan system, part number FLX116545
- Two fans run under a Variable Speed Controller that sets fan speed at 60-100 percent by radiator temperature
- Moves up to 6,800 cfm of airflow
- Designed for 2003-2007 Ford Super Duty trucks with the 6.0L diesel
SKU: FLX116545 -
-
Electric Fan Variable Speed Module
Flex-A-Lite Adjustable Temperature Electric Fan Controller – 107006
Electric Fan Variable Speed ModuleFlex-A-Lite Adjustable Temperature Electric Fan Controller – 107006
- Universal fit: it is not built for one specific vehicle.
- Part number FLX107006 from Flex-A-Lite
- Dial sets the fan activation temperature between approximately 180 and 240 degrees Fahrenheit
- 20 amp rating, intended for 12-volt systems only
SKU: FLX107006 -
Engine cooling versus cabin heating
This branch includes two related systems. The engine cooling side circulates coolant through the engine and radiator to remove heat. The heating and air side uses the same coolant through a heater core, with blower motors, resistors, ducts and controls to move air into the cabin.
Subcategories reflect this split, from radiators, water pumps and thermostats to heater hoses, blower motor resistors and HVAC door levers.
Common parts and what they do
Parts you will see:
- Radiators and caps: the cap holds system pressure, and its rating, such as 16 psi in one sample listing, must suit the system.
- Hoses and clamps: upper and lower radiator hoses and heater hoses are shaped for specific engines.
- Water pumps and gaskets: high-flow pumps are available for some engines, such as 4.0L inline sixes.
- Thermostats and housings: control operating temperature.
- Electric fans, fan clutches, shrouds and blades: pull air through the radiator.
- Transmission coolers: protect the transmission when towing or crawling.
Towing, crawling and heat
Off-road driving puts a cooling system under stress, with low airflow at slow speed, long climbs and heavy loads. An electric puller fan adds airflow at low speed, a transmission cooler lowers fluid temperatures, and a high-flow water pump can improve coolant circulation. Cooling upgrades work best as a system, because a bigger fan will not help a clogged radiator or old hoses.
When replacing cooling parts, flush the system, use the coolant type your manufacturer specifies, and bleed air from the system.
Fitment and installation
Cooling parts are very engine-specific. Confirm fitment for your exact year, make, model, engine size and any air conditioning or automatic transmission options, and check the manufacturer's specifications. Universal parts such as electric fans need correct mounting, wiring, a relay and a fuse.
Never open a hot cooling system, since pressurized coolant can cause burns. Let it cool fully first. Use a torque wrench on water pump and thermostat housing bolts and replace gaskets rather than reusing them. If you are unsure, have a qualified mechanic handle the work.
A simple maintenance habit goes a long way: inspect hoses for swelling or cracks, check the coolant level when cold, and replace the thermostat and radiator cap when you do other cooling work. Small parts like these often cause overheating before the radiator does.
Choosing parts and mistakes to avoid
A few habits prevent most cooling problems. Always replace the thermostat, gasket and radiator cap with a new water pump, because they are cheap and share the same system. Use hose clamps suited to the hose size, and check that new hoses do not rub on belts or the frame.
- Match the radiator core size and inlet and outlet positions to your engine, and check for transmission cooler connections if the vehicle has an automatic.
- When adding an electric fan, wire it with a relay and fuse and set the temperature switch as the manufacturer recommends.
- Do not mix coolant types or use plain water for long periods, because corrosion inhibitors matter.
- Bleed the system fully after any repair, as trapped air causes false overheating.
Popular Heating & Cooling brands
- Omix-Ada (88)
- Crown Automotive (80)
- Flex-A-Lite (44)
- Mishimoto (35)
- Jeep (9)
- FlowKooler (7)
- Dorman (5)
- Mr. Gasket Company (4)
- Painless Wiring (4)
- Bd Diesel (4)
- Be Cool (3)
- B&M (3)
Shop Heating & Cooling by type
- Radiator Hose (34)
- Engine & Transmission Cooling (40)
- Electric Cooling Fan (22)
- Radiator (20)
- Transmission Cooler (9)
- Water Pump (12)
- Thermostats (14)
- Heater Control Cable (11)
- Heater Core (9)
- Fan Shroud (9)
- Thermostat Gasket (8)
- Hose Clamp (7)
- Heater Hose (7)
- Thermostat Housing (7)
- HVAC Air Duct (7)
- Radiator & Reservoir Caps (5)
- HVAC Blower Motor Resistor (6)
- Engine Oil Cooler (6)
- HVAC Blower Motor (5)
- Radiator Accessories (4)
- Water Pump Accessories (4)
- Heater/Wiper Switch Knob (4)
- HVAC Heater Control Switch (4)
- Electric Cooling Fan Motor (3)
- Water Pump Gasket (2)
- Fan Spacer Kit (3)
- Heating & Air Conditioning (3)
- Fan Switch (1)
- Fan Clutch (3)
- Radiator Isolator (2)
Heating & Cooling FAQ
How do I know if my thermostat is bad?
Common signs are overheating, an engine that never reaches normal temperature, a heater that blows cool air, or temperature that swings. A mechanic can test the opening temperature.
Is an electric fan better than a clutch fan?
An electric fan can add airflow at low speed and free up some engine power, but it needs proper wiring and control. A working clutch fan is adequate for many stock setups.
Do I need a transmission cooler?
It is useful for towing, heavy loads and slow, hot trail driving, since heat is the main enemy of automatic transmission fluid. Check capacity and mounting for your vehicle.
What coolant should I use?
Use the type and mix your manufacturer specifies. Mixing different coolant chemistries can cause problems, so check the owner's manual before topping off or refilling.










