Overview
The fin and plate cooler comes with a 12 volt high flow electric fan and a thermal switch. It is universal fit, and the fan and switch are included with the cooler.
The cooler is pressure tested to 200 PSI and carries a 1 year limited warranty.
Key features
- Fin and plate construction
- 12 volt high flow fan
- Thermal switch for the fan
- Pressure tested to 200 PSI
Heat and cooler placement
Transmission fluid picks up heat under towing, hill climbing and stop-and-go traffic, and a cooler keeps that heat from building up over time. A fin and plate design moves heat through a dense core, and airflow across the fins does most of the work. An electric fan helps when the vehicle is stopped or moving slowly, which is when the fluid tends to run hottest.
Placement affects performance more than many buyers expect. Keep the cooler clear of road debris, leave room for the fan to pull air through the fins, and avoid spots where hot engine air is trapped. Route the lines with gentle bends and secure them away from moving parts.
- Keep the fins clear of mud, leaves and road debris
- Leave room for the fan to draw air through the core
- Secure lines away from exhaust and moving parts
Specifications
| Brand | B&M |
|---|---|
| Part number | 70297 |
| Cooler type | Automatic transmission cooler with electric fan |
| Construction | Fin and plate |
| Fan | 12 volt high flow |
| Thermal switch | Included |
| Pressure test | 200 PSI |
| Warranty | 1 year limited |
| Fitment | Universal fit |
Vehicle fitment
Universal fit means the cooler must suit your transmission’s fluid lines and mounting space. Confirm the fit for your vehicle before ordering.
Installation notes
The cooler includes a 12 volt fan and thermal switch, so the fan needs a 12 volt electrical supply and a switch wired as the thermal switch is intended. Check the mounting location for airflow and clearance from other parts.
What’s included
The fin and plate cooler, the 12 volt high flow fan and the thermal switch.









