Grille Shells
Showing 37–43 of 43 resultsSorted by popularity
-
Grille Shells
Rampage One-Piece 3-D Grille (Black) – 86513
- Rampage 86513 one-piece 3-D grille for the 2007–2018 Jeep Wrangler (JK)
- Heavy-duty formed steel with a Diamond Black finish
- Attaches to the underside of the factory grille shell
- May not fit 2014 to 2016 Special Edition Wranglers
SKU: RPP86513 -
-
Grille Shells
LED Grille
- Rigid Industries LED grille, part number 46587, for the 2016–2017 Chevrolet Silverado 1500
- 100 percent stainless steel with a black powder-coat finish
- UV and abrasion resistant powder-coat
- Direct fit, front position
- Limited lifetime warranty from Rigid Industries
SKU: RIG46587 -
Grille Shells
Rigid Industries LED Grille – 40596
- Fits 2014–2015 Toyota 4Runner (Limited, SR5, TRD Pro, Trail)
- Two-piece LED grille for one E-Series light bar, part number 40596
- Laser-cut 304 stainless steel, no welds
- Light bar not included; installation requires modifying the OEM grille shell
SKU: RIG40596 -
Grille Shells
T-Rex Grilles X-Metal Mesh Grille Assembly ( Black) – 6719641
- T-Rex Grilles X-Metal black mesh grille assembly, part number 6719641
- Replacement grille with a black powder-coat finish
- Bolt-on design that T-Rex says needs fewer tools and no cutting
- Sold as one piece, UPC 609579023894
- Confirm fit for your vehicle before ordering
SKU: T/R6719641 -
Grille Shells
Oracle Lighting Vector™ Series Grille – 5817-504
- Fits 07-Current Jeep Wrangler JK, 2 and 4 door models
- Oracle Lighting Vector Series grille, part number 5817-504
- Integrated LEDs rated at 5,600 combined lumens low beam and 7,200 combined lumens high beam
- Over 200 individual high output LEDs with amber turn signals and a daytime running light
- Plug and play wiring through the included harness adapter
SKU: ORC5817-504
What a grille shell is
The grille is the front opening that lets air flow into the radiator and condenser while keeping debris out. A shell is the outer frame, and the insert is the mesh, bars or billet pieces set inside it. Replacement products here include complete grilles, inserts and shell housings, and some have lighting built in. They give a vehicle a different look and can replace a damaged factory piece.
Styles
- Mesh grilles: Woven or perforated metal that blocks rocks and bugs while passing air.
- Billet grilles: Horizontal or vertical bars, often aluminum, with a cleaner, more open look.
- Stamped or ABS shells: Plastic or formed metal that matches the factory shape, commonly used as direct replacements.
- LED light grilles: Built-in lamps or light bars that act as driving lights or accents.
Materials and finishes
Stainless steel resists rust and takes a polish. Aluminum is lighter and used for billet styles. Powder-coated steel is durable but chips if the coating is scratched. Finish options such as black, chrome or brushed metal should suit your trim and surrounding parts. Keep in mind that thick mesh or tight bars can restrict airflow if the design is poor, so check that the product is meant for your vehicle, especially if you tow or run a hot engine.
What to compare
- Vehicle fit: year, make, model, trim and whether the factory grille holds sensors.
- Material and finish.
- Mounting method, whether it replaces the whole grille or fits over the stock one.
- Provision for cameras, radar or emblems.
- Wiring and relay requirements for any built-in lighting.
Installation notes
Many grilles install with clips and a few screws after removing the factory piece, but some need trimming, adhesive or wiring. Be careful with adaptive cruise radar and front camera brackets, since changes to the front fascia can interfere with them, and the manufacturer's notes should say if a product is compatible. Lighting should be wired through a relay and fuse sized for the load. Disconnect the battery before connecting any wiring, and follow local rules about auxiliary lights on public roads.
Fitment
Grilles vary even between trim levels of the same model, so confirm fitment for your exact year, make and model and read the manufacturer's specifications first.
Measuring and confirming fit
Compare the opening width and height, the position of the hood latch and the emblem, and the number of mounting points to those listed. Vehicles with adaptive cruise or a front camera often have an opening for a sensor that must stay uncovered. If you are not sure of your trim, check the build sheet or door jamb sticker for the exact model.
Care and common mistakes
Rinse away road salt, and wipe polished finishes with a suitable cleaner; abrasive pads can scratch stainless and chrome. For powder-coated shells, touch up chips promptly to prevent rust. Do not fasten mesh so tightly that it flexes and rattles. If you add lighting, avoid routing wires near the exhaust manifold, and use grommets where they pass through sheet metal. A grille that blocks the airflow to the radiator or intercooler can cause overheating, so test it under load.
Popular Grille Shells brands
Grille Shells FAQ
Will an aftermarket grille affect cooling?
A properly designed grille passes ample air, but very dense mesh or blocked openings can restrict it. Choose a product meant for your vehicle, and watch engine temperatures after installation, especially when towing.
Can I install a grille with built-in LED lights myself?
Many owners do, but wiring requires a fused relay circuit and care around the battery. If you are uncomfortable with electrical work, have a shop install it. Check local rules about using lights on the road.
What is the difference between a grille shell and an insert?
A shell is the outer frame that mounts to the vehicle, and an insert is the mesh or bar section that sits within it. Some products are complete shells and others are inserts for the factory frame.
Will a new grille work with my front camera or radar?
Only if it is designed for it. Look for listings that mention camera or sensor provisions, and verify against the manufacturer's notes for your vehicle, since obstructed sensors can disable driver-assist features.






