Select your vehicle

Push Pins under Doors & Door Accessories lists the plastic retainer fasteners that hold trim and body panels on Jeep and Dodge vehicles: push pins for door panels, fascia and air dams, grille fasteners, body panel pins for the Cherokee XJ and Comanche, hood insulation pins, Christmas tree clips for the Liberty KJ and door trim fasteners for the Wrangler YJ. Crown Automotive and Omix-ADA supply them individually with the original equipment numbers they replace. Match the OE number below.

Showing 1–12 of 30 resultsSorted by popularity

Small parts that stop rattles

Push pins are the plastic fasteners that hold interior door panels, kick panels, the front air dam and fascia, the grille, hood insulation, tail light trim and fender liners to the body. They break every time a panel comes off and they go brittle with age and heat, which is why a Jeep that has had its doors off for a stereo install rattles afterward. The parts here are factory-style replacements, sold individually, each cross-referenced to the Mopar number it replaces, so you can match them to the pin you broke rather than guess.

Identifying the right pin

  • By OE number: the most reliable way. The original number is often molded into the head of the pin or listed in the factory parts catalog for the panel you are working on. Omix-ADA listings here name the OE number they replace, for example the fascia pin that replaces 6502625 and the grille pin that replaces 6503598.
  • By location: listings describe the use: front fascia with an OEM bumper, front or rear door panel, grille to support, hood insulation, tail light and grille on the Compass and Patriot.
  • By shape: a push pin with a pull-out center has a two-piece design; a Christmas tree clip is a one-piece ribbed shank that pushes in and is destroyed on removal; a door trim fastener has a flat head that sits in the panel's cup.
  • By hole size and panel thickness: if you cannot find the number, measure the hole diameter and the combined thickness of the panels being joined. A pin for a 1/4 inch hole will spin in a 5/16 inch hole.

Vehicle coverage

The sample listings run from 1984 to 1996 Cherokee XJ and 1986 to 1992 Comanche body panel pins, through 1991 to 1995 Wrangler YJ door trim fasteners, Liberty KJ clips for 2002 to 2008, the 2007 to 2018 Wrangler JK fascia and grille pins, and Dodge Ram, Dakota, Durango and Nitro hood insulation and panel pins. Many pins cross between Chrysler, Dodge and Jeep because the body hardware was shared, so a pin listed for a Durango may be the one your Grand Cherokee WK needs. Note how many you need; the JK grille, for instance, uses six.

Removing and installing

Use a plastic trim removal tool or a push pin pliers, which grab under the head and pull straight out without tearing the panel. Pins with a center pin need that center pressed in or pulled out first, depending on the design. On installation, align the panel, start the pin by hand so it enters the hole squarely, and press until the head seats flat; a pin driven at an angle shears its ribs and never holds. Replace every pin that looks chalky or has lost its ribs, not just the one that broke, because the others are the same age.

Buying tips

Keep a small assortment for each vehicle in the glove box, since the moment you need one is when the panel is already off. Confirm the OE number and application against your exact year and model before choosing, and when a listing says fit varies by application, compare it with the old pin in hand.

Popular Push Pins brands

Push Pins FAQ

How do I find the part number for a broken push pin?

Look for a number molded into the head or shank of the old pin, or check the factory parts diagram for the panel it held. Listings in this category name the OE number each pin replaces. If no number is visible, match by location, head shape, shank length and hole diameter.

Can I reuse push pins after removing a door panel?

Two-piece pins can sometimes be reused if the ribs are intact and the plastic is not chalky, but they lose grip each time. One-piece Christmas tree clips are meant to be replaced on every removal. Having fresh pins on hand avoids rattles later.

Are Jeep and Dodge push pins interchangeable?

Many are, because Chrysler shared body hardware across Jeep, Dodge and Chrysler models in the same era. The listings note which vehicles each pin covers. Match the OE number rather than the brand name on the vehicle.

What tool should I use to remove push pins?

A push pin removal pliers or a forked plastic trim tool that slides under the head and lifts the pin straight out. Screwdrivers gouge the panel and bend the pin. For two-piece pins, release the center first as the design requires, then lift the body.