Select your vehicle

Crown Automotive Push Pin – J4004919

Crown Automotive

$12.45In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 4:10 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Push pin for the engine splash shield
  • Fits 1984–1996 Jeep Cherokee (XJ) and 1986–1992 Jeep Comanche
  • Crown Automotive part number J4004919
  • Direct fit

Description

Overview

The Crown Automotive J4004919 is a push pin for the engine splash shield. The shield sits under the engine, and the push pin holds it to the body without hardware. It fits the 1984–1996 Jeep Cherokee (XJ) and the 1986–1992 Jeep Comanche.

The Cherokee XJ and Comanche are older Jeep models, so fit is limited to those two vehicles. Check the year and model on your vehicle, and confirm the shield’s mounting hole matches the pin.

Key features

  • Push pin for the engine splash shield
  • Push-in fastener for the splash shield
  • Fits Cherokee XJ and Comanche models
  • Crown Automotive part number J4004919

Splash shield fasteners

Splash shields protect the underside of the engine bay from water, mud and road spray. They are usually held by a mix of bolts and push pins, and push pins are popular because they install quickly without tools. Over time, the plastic pin heads can become brittle from heat and age, and the center pin may back out, letting the shield sag or rattle.

When replacing a push pin, check that the hole in the shield is still round and undamaged. A worn or enlarged hole will not hold a new pin securely, and a sagging shield can rub against moving parts. Pull the old pin with a trim tool rather than prying the shield itself, which can crack the plastic.

If several pins have failed, consider replacing all of them at once so the shield seats evenly. Inspect the shield for cracks near each mounting point before reinstalling.

  • Check each mounting hole for wear
  • Replace brittle pins as a set
  • Inspect the shield for cracks near mounts

Specifications

Brand Crown Automotive
Part number J4004919
Application Engine splash shield
Type Push pin
Fitment type Direct fit

Vehicle fitment

It fits the following vehicles:

  • 1984–1996 Jeep Cherokee (XJ)
  • 1986–1992 Jeep Comanche

Later Cherokee models, including the KJ and KL generations, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One push pin, part number J4004919.

SKU: CROJ4004919 Categories: ,

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1984–1996Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport
Jeep Comanche1986–1992Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Crown J4004919 fit a 1990 Jeep Cherokee XJ?

Yes. It fits the 1984–1996 Jeep Cherokee (XJ), so a 1990 XJ falls within the covered years. Confirm the splash shield mounting hole matches the pin before installing.

What is the J4004919 push pin used for?

It is a push pin for the engine splash shield. It is designed for that single application, so it is not intended for other panels or locations.

Does this push pin fit a 1996 Jeep Comanche?

Not as covered. It fits the 1986–1992 Jeep Comanche, so the 1996 model year falls outside that range. Confirm your year before ordering.

How do you remove an old push pin without damaging the shield?

Use a trim tool or a flat plastic pry tool to lift the pin head, then pull it straight out. Avoid prying against the shield itself, since that can crack the plastic around the mounting hole.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon