Bumpers
Showing 25–36 of 350 resultsSorted by popularity
-
Bumpers
Rugged Ridge Short Base Winch Mount Front Bumper Center Section (Black) – 11540.40
- Fits 1976–1986 Jeep CJ5 and CJ7, 1981–1985 Scrambler, and 1987–1995 YJ, 1997–2006 TJ and 2004–2006 LJ Wrangler
- Stubby center section of the XHD modular front bumper, black powder coat
- Winch mount compatible, with D-ring mounting brackets included
- Light mounts not included
- Part number RUG11540.40
SKU: RUG11540.40 -
Bumpers
Rugged Ridge Dual Tube Rear Bumper without Hitch (Stainless Steel) – 11573.03
- Fits 1987–1995 Jeep Wrangler YJ, 1997–2006 TJ and 2004–2006 LJ models
- Stainless steel dual tube rear bumper with welded end caps
- 17-inch rear opening for tires up to 31 inch on the factory spare mount
- Optional frame-mounted receiver hitch available
- Part number RUG11573.03
SKU: RUG11573.03 -
Bumpers
Rough Country High Clearance LED Front Bumper (Black) – 10635
- Fits 2007–2018 and 2018–2026 Jeep Wrangler JK and JL models
- Full-width steel front bumper with a built-in 20-inch LED light bar
- Modular fog light mount and D-ring shackles included
- Skid plate for underbody protection
- Part number R/C10635
SKU: R/C10635 -
Bumpers
Rough Country Heavy Duty Rear LED Bumper (Black) – 10784
- Fits 1999–2016 Ford F-250 and F-350 Super Duty trucks
- All-steel rear LED bumper with two pre-installed 2-inch LED cubes
- Two integrated steps for bed access
- Keeps the factory receiver hitch; sensor relocators included
- Part number R/C10784
SKU: R/C10784 -
Bumpers
Rough Country Heavy Duty Rear LED Bumper (Black) – 10773
- Fits 2007–2018 Chevrolet Silverado 1500 trucks
- All-steel rear LED bumper with two 2-inch flush-mount LED cubes
- Two integrated steps for bed access
- Keeps the factory receiver hitch; sensor relocators included
- Part number R/C10773
SKU: R/C10773 -
Bumpers
Rough Country Heavy Duty Front LED Bumper (Black) – 10785
- Fits 2010 Dodge Ram 2500 and 3500 trucks; confirm trim before ordering
- All-steel front LED bumper with four 2-inch LED cubes and a 20-inch light bar
- Over 15,000 lumens of combined lighting power
- Sensor relocators keep the anti-collision system
- Part number R/C10785
SKU: R/C10785 -
Bumper Hardware & Replacement Parts
Rough Country Brake Pump Relocation Bracket – 1043
- Steel brake pump relocation bracket for 2012–2018 Jeep Wrangler (JK) models
- Required when installing Rough Country front winch or hybrid stubby bumpers
- Moves the brake pump canister on the frame rail
- Black finish and bolt-on installation
- Rough Country part number R/C1043
SKU: R/C1043 -
Bumpers
Rock-Slide Engineering R-SE Rigid Full Front Bumper without Bullbar (Black) – FB-F-101-JK
- Fits 2007–2018 Jeep Wrangler (JK) 2-door and Unlimited 4-door models
- Full-width steel front bumper with a contoured design, powder coat
- Winch mount compatible with a 9-inch drop, and light mounts included
- D-ring mounts included; hinged winch lid
- Part number RSEFB-F-101-JK
SKU: RSEFB-F-101-JK -
Bumpers
Rock Slide Engineering Rigid Series Rear Bumper (Black) – RB-F-101-JT
- Fits 2020–2026 Jeep Gladiator (JT) trucks
- Rear bumper with receiver hitch included
- Black finish; tire carrier not included
- Part number RSERB-F-101-JT
- Designed and built by Rock Slide Engineering in Logan, Utah
SKU: RSERB-F-101-JT -
Bumpers
Road Armor Stealth Front Winch Bumper with Pre-Runner Guard (Black) – 3191F3B
- Fits 2019–2022 Chevrolet Silverado 1500 and 1500 LTD trucks
- Full-width steel front winch bumper with pre-runner guard
- Hoop included; light mounts included
- Winch mount compatible, black powder-coat finish
- Part number R/A3191F3B
SKU: R/A3191F3B -
Bumpers
Road Armor Stealth Front Winch Bumper (Black) – 3191F0B
- Fits 2019–2022 Chevrolet Silverado 1500 and 1500 LTD trucks
- Full-width steel front winch bumper, black finish
- Winch mount compatible; light mounts included
- Built to house a WARN ZEON 10S or Smittybilt XRC winch, or similar
- Part number R/A3191F0B
SKU: R/A3191F0B -
Bumpers
Road Armor Stealth Front Non-Winch Bumper (Texture Black) – 370R0B-NW
- Fits 2003–2007 Chevrolet Silverado 2500, 2500 HD and 3500 trucks
- Full-replacement faceted steel front bumper, non-winch design
- Textured black powder-coat finish
- Made in Texas, USA, with a Lifetime Guarantee from Road Armor
- Part number R/A370R0B-NW
SKU: R/A370R0B-NW
What an aftermarket bumper changes
A factory bumper is designed around styling, pedestrian impact standards and cost. Off-road bumpers-bumpers-tire-carriers-winch-mounts-2 are built for approach angle, recovery points and accessory mounting. Most are bolt-on units made of steel plate or tubing, and many include a winch cradle, shackle or D-ring tabs and cutouts for auxiliary lights. Rear bumpers-bumpers-tire-carriers-winch-mounts-2 often add tire carrier provisions, hitch openings and recovery points.
Choosing a style
- Full-width front bumpers: cover the whole front end and give the most mounting space, often with a hoop or guard option for added protection.
- Stubby bumpers: shorten the front overhang and shed weight, improving approach angle but offering less coverage.
- Pre-runner and guard styles: add a bar or hoop that protects the grille and headlights from brush and minor impacts.
- Rear bumpers: prioritize departure angle, tow points and optional swing-out carriers.
- Brackets and replacement parts: end caps, mounting kits and hardware for existing bumpers.
Key specs to compare
Look at the material and thickness, since plate steel is heavier but tougher while aluminum saves weight. Check whether the bumper is winch-compatible, and confirm the winch mount fits the winch you plan to run. Note the finish (bare steel, textured powder coat or black coat), whether light mounts and D-ring mounts are included, and whether the design leaves room for factory sensors, cameras or tow hooks. Also consider weight: a heavy steel front bumper plus a winch adds load to the front axle and may need stiffer springs or a suspension adjustment to restore ride height.
Installation notes
Many bumpers-bumpers-tire-carriers-winch-mounts-2 bolt to existing frame holes, but some require trimming the factory bumper, relocating sensors or modifying splash shields. Installation usually takes two people because of the weight. Use the supplied hardware, torque it to the instructions, and recheck it after the first off-road outing. If the bumper carries a winch or recovery points, use only properly rated shackles and follow the rating of every part in the recovery chain.
Fitment and compliance
Bumpers are vehicle-specific. Confirm fitment for your exact year, make, model and trim, including whether your truck has parking sensors, adaptive cruise radar or a front camera, since these can affect what fits. Airbag and sensor behavior can be affected by bumper changes, so read the manufacturer's notes. Bumper height, lighting and equipment rules vary by state, so check local regulations before installing.
Planning around the rest of the vehicle
A bumper rarely goes on alone. A winch needs a suitable battery, wiring and a fairlead that matches the rope or cable. Auxiliary lights need a relay, a fused circuit and a switch. Before choosing, sketch what you plan to add so the bumper has room for all of it, and check whether its light mounts match the lights you have in mind.
Think about how you drive, too. A rig that sees mostly highway miles may prefer a lighter stubby design, while a vehicle that regularly pulls others out benefits from a full-width unit with protected recovery points. Finally, inspect the bumper after each hard trail day. Cracked welds, bent tabs or loose bolts are easier to fix early than after the next impact, and the finish should be touched up where bare metal shows to prevent rust from creeping under the coating.
Popular Bumpers brands
- Fab Fours (91)
- Addictive Desert Designs (46)
- Smittybilt (28)
- ARB 4x4 Accessories (28)
- Crown Automotive (22)
- Ranch Hand (18)
- DV8 Offroad (18)
- Go Rhino (13)
- Rugged Ridge (11)
- Body Armor 4x4 (11)
- Omix-Ada (10)
- Poison Spyder Customs (8)
Shop Bumpers by type
- Bumper Hardware & Replacement Parts (73)
- Bumper Accessories (15)
- Bumper Mounting Kit (7)
- Bumper Styling (1)
Bumpers FAQ
Will an aftermarket bumper fit with my parking sensors?
Some bumpers include sensor cutouts or brackets, as the Stealth Fighter style listing with sensor suggests, while others do not. Check the product description for sensor compatibility and confirm fitment for your exact year, model and trim.
Do I need a winch to use a winch-compatible bumper?
No. A winch-compatible bumper simply has a mounting plate or cradle ready for one. You can run it without a winch, and many owners add the winch later. Confirm the winch bolt pattern and size before purchasing.
How much weight does a steel bumper add?
Weight varies widely by design, from lightweight stubby units to heavy full-width plate bumpers. The added front weight can sag the springs, so check the listed weight and consider suspension changes if you also add a winch.
Can I tow or recover from the bumper D-rings?
Only if the manufacturer rates them for it. Use shackles with a rated capacity that suits the load, attach only to designated recovery points, and never exceed the lowest-rated component in the chain.











