Bumpers
Showing 61–72 of 350 resultsSorted by popularity
-
Bumpers
Poison Spyder Customs Crawler Front Bumper – 19-58-010DBP1
- Stubby-width front bumper with top-mounted integrated winch mount for 2018–2026 Jeep Wrangler JL
- Also fits the 2020–2026 Jeep Gladiator (JT)
- Recessed fog lamp mounts and harness retainer clip holes
- Part number PSC19-58-010DBP1, powder coat with SpyderShell finish
SKU: PSC19-58-010DBP1 -
Bumpers
Poison Spyder Customs Bruizer Rear Bumper (Black) – 17-67-010P1
- Rear bumper with integrated 2-inch hitch receiver for 2007–2018 Jeep Wrangler JK
- Mounts without cutting the frame rails
- Works with frame mounted or body mounted tire carriers
- Part number PSC17-67-010P1, semi-gloss black finish
SKU: PSC17-67-010P1 -
Bumpers
Poison Spyder Customs Bruizer Rear Bumper – 19-67-010P1
- Rear bumper with integrated class III hitch for 2018–2026 Jeep Wrangler JL
- Accepts a frame mounted tire carrier added later
- Recessed mounts for LED cube lights, lamps not included
- Part number PSC19-67-010P1, semi-gloss black finish
SKU: PSC19-67-010P1 -
Bumpers
Poison Spyder Customs Bruizer Front Bumper (Black) – 17-57-010DBTP1
- Grille-width front bumper with recessed winch mount for 2007–2018 Jeep Wrangler JK
- Accepts most 10 by 4.5-inch pattern winches, including Warn ZEON up to 10S
- Recessed LED cube light mounts, lights not included
- Semi-gloss black SpyderShell finish, part number PSC17-57-010DBTP1
SKU: PSC17-57-010DBTP1 -
Bumpers
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar (Bare) – 17-59-010-DB
BumpersPoison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar (Bare) – 17-59-010-DB
- Stubby-width front bumper with Brawler Bar for 2007–2018 Jeep Wrangler JK
- Winch mount compatible; 3/16-inch plate steel
- Mounts without cutting the frame rails
- Optional recovery shackle tabs; listed with a bare finish
SKU: PSC17-59-010-DB -
-
Bumper Hardware & Replacement Parts
Jeep Front Bumper End Caps – 82215115AB
- Factory style front bumper end caps, sold for both sides
- For replacing damaged end caps or adding width to a Rubicon stubby bumper
- Fits the 2018–2026 Jeep Wrangler (JL) and 2020–2026 Jeep Gladiator
- Jeep part number JEP82215115AB
SKU: JEP82215115AB -
Bumpers
Iron Cross Automotive Low Profile Front Bumper (Gloss Black) – 40-515-07
- 40 Series low profile gloss black steel front bumper for 2007–2013 Silverado 1500
- Low profile: no farther projection than the factory bumper
- Takes a 20–22 inch center light bar and 6-inch outer bars
- Part number ICA40-515-07, light and D-ring mounts included
SKU: ICA40-515-07 -
Bumpers
Iron Cross Automotive Low Profile Front Bumper (Gloss Black) – 40-515-03
- 40 Series low profile front bumper for 2003–2006 Silverado 1500 and 1500 HD
- Designed to project no further than the factory bumper
- Center housing for a 20–22 inch LED light bar, outer housings for 6-inch bars
- Part number ICA40-515-03, gloss black steel, winch mount not compatible
SKU: ICA40-515-03 -
Bumpers
Iron Cross Automotive Heavy Duty Front Bumper with Push Bar (Gloss Black) – 22-515-14
- Full-width steel front bumper with push bar for 2014–2015 Chevrolet Silverado 1500
- Winch mount compatible, with a hoop included
- Light mounts and D-ring mounts included
- Part number ICA22-515-14, gloss black
SKU: ICA22-515-14
What an aftermarket bumper changes
A factory bumper is designed around styling, pedestrian impact standards and cost. Off-road bumpers-bumpers-tire-carriers-winch-mounts-2 are built for approach angle, recovery points and accessory mounting. Most are bolt-on units made of steel plate or tubing, and many include a winch cradle, shackle or D-ring tabs and cutouts for auxiliary lights. Rear bumpers-bumpers-tire-carriers-winch-mounts-2 often add tire carrier provisions, hitch openings and recovery points.
Choosing a style
- Full-width front bumpers: cover the whole front end and give the most mounting space, often with a hoop or guard option for added protection.
- Stubby bumpers: shorten the front overhang and shed weight, improving approach angle but offering less coverage.
- Pre-runner and guard styles: add a bar or hoop that protects the grille and headlights from brush and minor impacts.
- Rear bumpers: prioritize departure angle, tow points and optional swing-out carriers.
- Brackets and replacement parts: end caps, mounting kits and hardware for existing bumpers.
Key specs to compare
Look at the material and thickness, since plate steel is heavier but tougher while aluminum saves weight. Check whether the bumper is winch-compatible, and confirm the winch mount fits the winch you plan to run. Note the finish (bare steel, textured powder coat or black coat), whether light mounts and D-ring mounts are included, and whether the design leaves room for factory sensors, cameras or tow hooks. Also consider weight: a heavy steel front bumper plus a winch adds load to the front axle and may need stiffer springs or a suspension adjustment to restore ride height.
Installation notes
Many bumpers-bumpers-tire-carriers-winch-mounts-2 bolt to existing frame holes, but some require trimming the factory bumper, relocating sensors or modifying splash shields. Installation usually takes two people because of the weight. Use the supplied hardware, torque it to the instructions, and recheck it after the first off-road outing. If the bumper carries a winch or recovery points, use only properly rated shackles and follow the rating of every part in the recovery chain.
Fitment and compliance
Bumpers are vehicle-specific. Confirm fitment for your exact year, make, model and trim, including whether your truck has parking sensors, adaptive cruise radar or a front camera, since these can affect what fits. Airbag and sensor behavior can be affected by bumper changes, so read the manufacturer's notes. Bumper height, lighting and equipment rules vary by state, so check local regulations before installing.
Planning around the rest of the vehicle
A bumper rarely goes on alone. A winch needs a suitable battery, wiring and a fairlead that matches the rope or cable. Auxiliary lights need a relay, a fused circuit and a switch. Before choosing, sketch what you plan to add so the bumper has room for all of it, and check whether its light mounts match the lights you have in mind.
Think about how you drive, too. A rig that sees mostly highway miles may prefer a lighter stubby design, while a vehicle that regularly pulls others out benefits from a full-width unit with protected recovery points. Finally, inspect the bumper after each hard trail day. Cracked welds, bent tabs or loose bolts are easier to fix early than after the next impact, and the finish should be touched up where bare metal shows to prevent rust from creeping under the coating.
Popular Bumpers brands
- Fab Fours (91)
- Addictive Desert Designs (46)
- Smittybilt (28)
- ARB 4x4 Accessories (28)
- Crown Automotive (22)
- Ranch Hand (18)
- DV8 Offroad (18)
- Go Rhino (13)
- Rugged Ridge (11)
- Body Armor 4x4 (11)
- Omix-Ada (10)
- Poison Spyder Customs (8)
Shop Bumpers by type
- Bumper Hardware & Replacement Parts (73)
- Bumper Accessories (15)
- Bumper Mounting Kit (7)
- Bumper Styling (1)
Bumpers FAQ
Will an aftermarket bumper fit with my parking sensors?
Some bumpers include sensor cutouts or brackets, as the Stealth Fighter style listing with sensor suggests, while others do not. Check the product description for sensor compatibility and confirm fitment for your exact year, model and trim.
Do I need a winch to use a winch-compatible bumper?
No. A winch-compatible bumper simply has a mounting plate or cradle ready for one. You can run it without a winch, and many owners add the winch later. Confirm the winch bolt pattern and size before purchasing.
How much weight does a steel bumper add?
Weight varies widely by design, from lightweight stubby units to heavy full-width plate bumpers. The added front weight can sag the springs, so check the listed weight and consider suspension changes if you also add a winch.
Can I tow or recover from the bumper D-rings?
Only if the manufacturer rates them for it. Use shackles with a rated capacity that suits the load, attach only to designated recovery points, and never exceed the lowest-rated component in the chain.










