Select your vehicle

Poison Spyder Customs Bruizer Front Bumper (Black) – 17-57-010DBTP1

Poison Spyder Customs

$1,097.62In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 3:40 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Grille-width front bumper with recessed winch mount for 2007–2018 Jeep Wrangler JK
  • Accepts most 10 by 4.5-inch pattern winches, including Warn ZEON up to 10S
  • Recessed LED cube light mounts, lights not included
  • Semi-gloss black SpyderShell finish, part number PSC17-57-010DBTP1

Description

Overview

The Poison Spyder Customs Bruizer Front Bumper, part number PSC17-57-010DBTP1, is a grille-width, high clearance front bumper with recessed winch mounting for the 2007–2018 Jeep Wrangler (JK). Poison Spyder finishes it in semi-gloss black with its SpyderShell Armor Coat process.

The bumper is fabricated from 3/16-inch plate steel, CNC laser cut and precision brake formed into a low profile, high clearance design. The ends extend far enough to protect the lower corner of the grille, but not so far that they limit tire clearance or access to vertical obstacles.

The winch sits in a heavy duty cradle that is separate from the bumper shell, so the mount has its own strength and keeps the winch low in the bumper. The recessed position leaves radiator airflow open at highway speeds. The winch fairlead mounts directly to the integrated fairlead mount on the front of the bumper, so no separate fairlead mount is needed.

The recessed winch cradle accepts most Warn, Smittybilt and other brand winches that use the 10 by 4.5-inch mounting pattern, including Warn ZEON series winches up to model 10S. ZEON spacers are not needed with this bumper.

The Brawler Bar follows the bar on the brand’s original RockBrawler front bumper. It is a low profile stinger that protects the winch, grille and radiator area, built from CNC laser notched, NC bent 1-3/4-inch diameter, .120 wall DOM tubing. CNC laser notched DOM tube gussets support it.

The bumper mounts without cutting the frame rails. The factory crash bar requires minor trimming to fit. It can stay in place or be removed for a cleaner look and more clearance. If it stays, the JK Bruizer Front Skid, available separately, conceals the crash bar and protects the electronic sway bar disconnect.

Recessed mounts accept Rigid Industries Dually or similar LED pod lights. Poison Spyder lists compatibility with most 2 by 2 LED cube lights, such as the Pro-Comp 76406P or Rigid D-Series. The lamps are not included. The extreme duty recovery shackle tabs are CNC machined from 1-inch billet, pass through the shell and are welded on both sides for 3/4-inch recovery shackles.

The SpyderShell finish starts with media blasting and seam sealing with 3M Scotch-Weld, followed by a zinc-rich black primer and a semi-gloss black topcoat. Poison Spyder offers a 5-year warranty on materials and workmanship.

Key features

  • Recessed winch mount in a separate heavy duty cradle
  • Integrated fairlead mount, so no separate fairlead mount is needed
  • Brawler Bar of 1-3/4-inch DOM tubing with notched gussets
  • Recessed LED cube light mounts
  • 1-inch billet recovery shackle tabs for 3/4-inch shackles

Planning winch and light setup

Recessed winch and light mounts keep equipment low and protected, but they still need planning. Before installing, dry-fit the winch and confirm that cable and hook movement will not contact the bumper or grille. Use the included fairlead mount and check that its height lines up with the winch drum so the cable spools evenly.

Lights and winches both draw power, so plan the wiring route and fuse protection before drilling or fastening. Keep harnesses clear of heat sources and moving parts, and use weatherproof connectors where they are exposed. Periodically inspect the finish around the recessed areas for chips, since moisture reaching bare steel can start corrosion. Touch-ups keep the protective coating working as intended.

  • Dry-fit the winch before final torque
  • Plan light wiring with fusing
  • Touch up chips promptly

Specifications

Brand Poison Spyder Customs
Part number PSC17-57-010DBTP1
Position Front
Width Grille-width
Material Steel, 3/16-inch plate
Finish Semi-gloss black, SpyderShell Armor Coat
Winch mount compatible Yes, 10 by 4.5-inch pattern
Winch fairlead Integrated mount on bumper
LED cube light mounts Recessed; lamps not included

Vehicle fitment

It fits the 2007–2018 Jeep Wrangler (JK) in two-door and four-door models as a direct fit. Confirm fit for your vehicle’s year, model and trim before ordering.

The list does not include the Wrangler JL or the Gladiator. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The bumper includes the recessed winch cradle, the integrated fairlead mount, the Brawler Bar and the recessed LED cube light mounts.

Not included: the LED lamps, the winch and the JK Bruizer Front Skid.

SKU: PSC17-57-010DBTP1 Categories: , ,

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201870th Anniversary (2-Door), 75th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door), X (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bruizer front bumper fit a 2015 Jeep Wrangler JK?

Yes. Poison Spyder lists part number PSC17-57-010DBTP1 for the 2007 through 2018 Jeep Wrangler (JK) with direct fit, in two-door and four-door models. A 2015 Wrangler JK is in the listed range, so check the body style before installing.

Which winches fit the Bruizer?

The bumper fits most Warn, Smittybilt and other brand winches that use the 10 by 4.5-inch pattern, including Warn ZEON series up to model 10S. ZEON spacers are not needed.

Does the bumper need a skid plate?

No. A skid plate is optional. The JK Bruizer Front Skid is sold separately, and when the factory crash bar stays in place it conceals the bar and protects the electronic sway bar disconnect.

Can LED lights be mounted in the bumper?

Yes. The bumper has recessed mounts for LED pod lights, including Rigid Industries Dually or similar lights, and Poison Spyder lists compatibility with most 2 by 2 LED cube lights. The lamps are not included with the bumper.

Can I add a winch after installing the bumper?

Yes. The bumper includes a recessed winch cradle that accepts winches with the listed mounting pattern. Confirm the mounting pattern of the winch first, then dry-fit it before final tightening. Recheck the bolts after the first few uses.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon