Overview
The Crawler front bumper is a stubby, grille-width design with a top-mounted integrated winch mount. It is made for the 2018–2026 Jeep Wrangler (JL) and the 2020–2026 Jeep Gladiator (JT), with direct fit.
The bumper is formed from 3/16-inch plate steel with large radius bends. The winch mount sits inside a fully boxed, internally gusseted shell. It accepts most Warn and other brand winches with the 10 by 4.5-inch mounting pattern, with a few exceptions. Warn ZEON series winches need the brand’s ZEON Winch Spacer Plates.
The Brawler Bar is a low profile stinger built from CNC laser notched, NC bent 1-3/4-inch diameter, .120 wall DOM tubing. It is welded to multiple planes of the bumper and supported by a pair of gussets cut from 1/4-inch plate steel, which protect the winch, grille and radiator area.
The bumper installs without cutting the frame rails. The factory crash bar requires minor trimming, and it can stay in place or be removed. If it stays, the JL Crawler Front Skid, available separately, conceals it and protects the electronic sway bar disconnect.
Recessed fog lamp mounts are built into tubular buckets that encircle the lamp, which the brand says keeps light from leaking around the bumper. Holes for the factory harness retainer clips keep the wiring secured. For more light, Poison Spyder says Rigid Industries Dually or D2 Dually lamps can be fitted with its dually fog light mounts.
The extreme duty recovery shackle tabs are CNC machined from 1-inch steel billet, pass through the shell and are welded on both sides for 3/4-inch recovery shackles. The SpyderShell finish is a six-stage coating system, and Poison Spyder offers a 5-year warranty on materials and workmanship.
Key features
- Top-mounted integrated winch mount in a fully boxed shell
- Winch mount compatible with the 10 by 4.5-inch pattern, with Warn ZEON spacer plates
- Brawler Bar of 1-3/4-inch DOM tubing with 1/4-inch gussets
- Recessed fog lamp buckets and harness retainer clip holes
- 1-inch billet recovery shackle tabs for 3/4-inch shackles
Winch and bumper setup
A winch on a front bumper adds weight high on the nose and loads the mounting points every time the line pulls. Match the winch’s rated line pull to the Jeep and the recovery you expect, and use a fairlead that keeps the line centered on the drum. Check the winch bolts and spacer plates after the first few uses, since shock loads loosen fasteners over time.
The Crawler bumper’s recessed fog mounts and harness clips help keep wiring tidy, but the winch cable and remote should be routed away from hot exhaust and sharp edges. A skid below the bumper protects the winch area on ledges, and the crash bar may need trimming to fit, so plan that work before installing the winch.
- Check winch bolts after the first few uses
- Route the cable and remote away from heat and sharp edges
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | PSC19-58-010DBP1 |
| Position | Front |
| Width | Stubby, grille-width design |
| Material | Steel, 3/16-inch plate |
| Finish | Powder coat, SpyderShell black |
| Winch mount compatible | Yes |
| Light mounts included | Yes, recessed fog lamp mounts |
| D-ring mounts included | Yes |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler (JL) in two-door and four-door models, and the 2020–2026 Jeep Gladiator (JT), with direct fit.
The list does not include the Wrangler JK (2007–2018) or earlier Wrangler generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Warn ZEON series winches need the brand’s ZEON Winch Spacer Plates. The factory crash bar requires minor trimming to fit.
What’s included
The bumper includes the recessed fog lamp mounts, the harness retainer clip holes and D-ring mounts.
Not included: the winch, the fog lamps and the JL Crawler Front Skid.














