Overview
The Ranch Hand Legend Series Front Bumper, part number R/HFBF991BLR, is a full width black powder coated front bumper for the 2000–2004 Ford Excursion and the 1999–2004 Ford F-250 Super Duty and F-350 Super Duty. It is frame mounted and built as one fully welded piece.
The bumper body is 4-inch schedule 40 pipe and diamond plate steel. Its 12 gauge grille guard tubing wraps around the headlights, and the punched plate grille insert is designed to match each make and model, with no expanded metal.
A 2-inch receiver is standard. Ranch Hand says most applications keep the tow hooks and factory fog lights.
A frame mounted bumper attaches to the frame rather than the body. It is a full width front end with a grille guard, designed for the Excursion and Super Duty trucks it fits.
Key features
- One-piece, fully welded frame mounted construction
- 4-inch schedule 40 pipe and diamond plate body
- 12 gauge grille guard
- Standard 2-inch receiver
- Punched plate grille insert with no expanded metal
Grille guard and headlight protection
A grille guard with wraparound headlight protection sits ahead of the lights and radiator area, so it takes the first contact in brush and minor impacts. Its job is to absorb that contact and keep the headlights from being struck. Confirm that the grille inserts clear the radiator and cooling airflow, and check that the headlights aim correctly once the guard is mounted.
Full width front ends with pipe and plate bodies are heavier than stock, so the frame mounts carry more load. Inspect bolts and welds after rough use, and tighten fasteners at the first service. Repair any chips in the powder coat to keep bare metal away from road salt, which can corrode welds faster than painted surfaces.
Specifications
| Brand | Ranch Hand |
|---|---|
| Part number | R/HFBF991BLR |
| Position | Front |
| Width | Full |
| Material | Steel, schedule 40 pipe and diamond plate |
| Finish | Black powder coat |
| Receiver | 2-inch, standard |
| Light mounts included | Yes |
| D-ring mounts | Not included |
| Winch mount compatible | No |
Vehicle fitment
It is a direct fit for the 2000–2004 Ford Excursion and the 1999–2004 Ford F-250 Super Duty and F-350 Super Duty.
The years covered are 2000 through 2004 for the Excursion and 1999 through 2004 for the Super Duty models, so earlier and later trucks need a separate fit check.
The list does not include the Ford F-150 or any Super Duty model from 2005 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Factory fog lights and tow hooks are kept on most applications. Confirm fit for your vehicle’s year, model and trim before starting, including whether drilling is needed.
What’s included
A 2-inch receiver and light mounts are included with the bumper.
Not included: D-ring mounts.









