Overview
The Skyjacker RBL67 (part number SKYRBL67) is a single stainless steel braided rear brake line for the 1969-1971 Dodge W100, W200 and W300 pickups, made for a lift of 4 to 8 inches.
The hose has a brass fitting and an extruded polyurethane coating. It carries DOT certification and European T.U.V. approval.
Key features
- Rear position, one hose
- Stainless steel braided hose
- Heavy-duty off-road brass fitting
- Extruded polyurethane coating
- DOT certified and European T.U.V. approved
- Limited lifetime warranty
Brake lines on higher-lift trucks
A higher lift on a W-series pickup lengthens the path between the frame and the rear axle, so the brake hose needs enough length to move without tension. A hose that is too short can pull at its fittings, while one that is too long can drag or catch on the frame, the spring hangers or the driveline. Stainless braided hoses hold their shape under flex better than standard rubber, which helps keep the line in its intended route over time.
Older trucks often have brake lines that have been bent or patched during previous work. When the hose is changed, look at the steel lines that feed it, the frame clips and the rear brake hardware. Replace any corroded clips, and make sure the new hose sits clear of exhaust heat and sharp edges.
- Confirm the hose length against the new ride height
- Check clips and brackets for corrosion
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYRBL67 |
| Product type | Stainless steel braided brake hose |
| Hose material | Stainless steel |
| Fitting | Heavy-duty off-road brass |
| Outer coating | Extruded polyurethane |
| Position | Rear |
| Lift height | 4 to 8 inches |
| Quantity | Single (one hose) |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1969-1971 Dodge W100, W200 and W300 pickups.
Other Dodge trucks and other model years are not on the list. Confirm your vehicle’s year, model and trim before ordering.









