Overview
The Baer Brakes 6801319 is a pair of stainless steel inverted flare hard lines for connecting a Baer Remaster master cylinder to a Remaster specific proportioning valve. Each line has 3/8 thread inverted flare male compression ends, and the set fits 1-1/8 inch Remaster master cylinders in either left or right port configuration.
Baer notes that these hard lines are specific to Remaster bore size, so they are matched to the 1-1/8 inch Remaster rather than to other master cylinder bores. The lines are pre-formed, meaning they come shaped for routing between the two components, and four tube nuts with brass seats are included with the set. The finish is silver.
Because the inlet and outlet fittings use 3/16 inch inverted flare tube nut connections, the set is built around the same flare style used on Remaster brake hardware. Builders running a Remaster front brake system with a Remaster proportioning valve will find these lines sized for that pairing.
Key features
- Stainless steel line material
- Pre-formed hard lines shaped before installation
- 3/8-24 proportioning outlet size with inverted flare ends
- Compatible with left and right port Remaster units
- Includes two lines and four tube nuts
- Silver finish with premium grade listed
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801319 |
| UPC | 844165052326 |
| Series | Remaster |
| Line material | Stainless steel |
| Color | Silver |
| Lines included | 2 hard lines |
| Thread diameter | 3/8 (.375) inch at both ends |
| End fittings | Male compression, inverted flare at both ends |
| Inlet and outlet fitting | 3/16 inch inverted flare and tube nuts with brass seat |
| Proportioning outlet port size | 3/8-24 inch |
| Bore compatibility | 1-1/8 inch Remaster |
| Pre-formed | Yes |
| DOT approved | No |
| Grade | Premium |
| Sold as | Pair (kit) |
Vehicle fitment
This part names no vehicle. It is matched by the 1-1/8 inch Remaster bore and the Remaster proportioning valve, so it is not sized by vehicle model.
Confirm the bore of your master cylinder and the type of your proportioning valve before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the master cylinder bore is 1-1/8 inch, since the description limits these lines to Remaster bore size. Fit the tube nuts with their brass seats at each end before final tightening, and confirm the pre-formed lines clear the chassis and moving parts. Bleed the brakes and check each connection for leaks before driving.
What’s included
Two pre-formed stainless steel hard lines with four tube nuts and brass seats.
Not included: the Remaster master cylinder and Remaster proportioning valve that these lines connect.









