Overview
The Pro Comp 7310 is a braided stainless steel brake hose kit for the 1989 to 1990 Ford Bronco II and the 1988 to 1996 Ford Ranger. It is built for lifted trucks, with a listed lift height of 5.
Braided stainless lines do not swell under the heavier braking pressure larger tires require, so pedal response stays quick and positive. The three hoses come together as one kit for the front and rear of the truck.
Key features
- Stainless braid in place of the stock rubber hoses
- Rated at a lift height of 5
- Three hoses: front left, front right and rear
- Direct fit
- Resists swelling under hard braking
- D.O.T. compliant
Hose length and fit checks
Brake hoses flex with the suspension, so the way they run matters as much as their length. On a lifted truck, the routing from the chassis to each wheel changes slightly through travel, and a hose that is correct at rest can rub when the wheel is at full droop. Lay each new hose along the old route and compare the bend before tightening any fitting.
Because the front hoses in this kit are different lengths, keep track of which hose goes to which side. Mark the lines during removal, and install the matching hose on each side. Once the hoses are connected, bleed the brakes and inspect every fitting for leaks before normal driving.
- Label the old hoses before removing them
- Confirm each hose clears moving parts at full travel
- Check fittings again after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 7310 |
| UPC | 614901180237 |
| Product type | Brake hose kit |
| Hose material | Stainless steel braid |
| Front left hose length | 25.25 inch |
| Front right hose length | 26 inch |
| Rear hose length | 26.25 inch |
| Lift height | 5 |
| Lift range | 4 inch to 6 inch |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1989 to 1990 Ford Bronco II and the 1988 to 1996 Ford Ranger. The front hoses are different lengths, with the right hose 26 inch and the left 25.25 inch.
Other Bronco II years and the full-size Bronco are not on the list, and Ranger years before 1988 are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One brake hose kit: front left, front right and rear stainless braided hoses.
