Overview
The Russell Performance 639590 Speed Bleeders are replacement bleeder screws with a spring-loaded one-way ball and check valve. They replace the original bleeder valve in a caliper or wheel cylinder, and are supplied in pairs for the front position on vehicles with rear drum brakes.
To use them, loosen the Speed Bleeder 1/4 to 1/2 turn and press the brake pedal. Pressure opens the check valve to let air and old fluid out, and when the pedal is released the valve closes so air cannot get back into the line, which makes one-person bleeding practical.
Key features
- Spring-loaded one-way ball and check valve design
- Supplied in pairs
- Front position
- For vehicles with rear drum brakes
- Loosen 1/4 to 1/2 turn, then pump the pedal
Bleeding brakes with one person
Bleeding a brake system removes air and old fluid, which keeps the pedal firm. Speed-type bleeder screws make the job easier for one person because the check valve stops air from being drawn back in when the pedal is released. Work from the wheel farthest from the master cylinder, and keep the fluid reservoir topped up so air is not pulled into the lines.
Bleeder screws can seize or round off if they are forced, so hand tools and a little penetrating oil help. Inspect the threads and seats of the old screws for corrosion before removing them. Use fresh brake fluid of the type the system calls for, and dispose of old fluid properly. After bleeding, check the pedal feel and look for leaks at each screw.
- Keep the reservoir full throughout
- Replace damaged bleeder screws rather than forcing them
- Catch fluid in a clear container to watch for air
Specifications
| Brand | Russell Performance |
|---|---|
| Part number | 639590 |
| Part type | Brake bleeder screws (Speed Bleeders) |
| Quantity | Pair |
| Position | Front |
| Rear brakes | Drum |
| Fit type | Direct fit |
Vehicle fitment
The 639590 fits 48 vehicle entries from Dodge, Ford, Jeep, Mazda and Mercury, including the 1985-2003 Ford F-150, 1986-1996 Ford Ranger, 1985-1996 Ford Bronco, 1987-1995 Jeep Wrangler (YJ) and 1986-1997 Jeep Cherokee (XJ). The full list of 48 entries is in the Fitment tab.
Different model years and models need different Speed Bleeder part numbers. Confirm your vehicle’s year, model and trim before ordering.
What’s included
- Two Speed Bleeder bleeder screws









