Overview
The Baer Brakes 6801318 is a polished stainless steel banjo hard line kit for Baer 1-1/8 inch Remaster master cylinders. It connects a Remaster master cylinder to a Remaster specific proportioning valve and fits both left and right port configurations.
The kit includes two hard lines, four banjo bolts and eight copper crush washers, which gives two washers for each banjo bolt. The banjo design gives a clean, streamlined look that suits show car builds. The lines are pre-formed in stainless steel with a brilliant chrome finish.
Because these are banjo connections, they do not use the tube nut flares of an inverted flare line. Builders who want the banjo style on a Remaster front brake system will find the fittings and washers sized to match the 1-1/8 inch Remaster bore.
Key features
- Stainless steel line construction
- Brilliant chrome finish with a polished color
- Banjo fittings with female gender at both ends
- Includes four banjo bolts and eight copper crush washers
- Fits 1-1/8 inch Remaster on left and right port configurations
- Pre-formed hard lines for a streamlined look
Banjo fittings and washers
Banjo fittings use a hollow bolt that passes fluid through the center, sealed on both faces by a crush washer. Because the washer deforms when tightened, it is designed for one use, and a washer that has been compressed once should not be reused. Keeping the sealing faces clean and free of scratches is just as important as the washer itself.
Banjo joints are often chosen for show and track builds because the lines run neatly close to the body, but the same fittings are used on working vehicles. Check each joint after installation and during routine service, looking for weeping at the washer or a bolt that has backed off. Bleeding the system after any banjo connection is changed removes trapped air.
- Replace washers as a set when a joint is opened
- Wipe brake fluid off paint and plastic at once
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801318 |
| UPC | 844165052319 |
| Series | Remaster |
| Line material | Stainless steel |
| Color | Polished |
| Finish | Brilliant chrome |
| Bore compatibility | 1-1/8 inch Remaster |
| End 1 fitting | Female banjo gender |
| End 2 fitting | Female banjo gender, banjo type |
| Banjo bolt quantity | 4 |
| Washers | 8 copper crush washers |
| Lines included | 2 hard lines |
| Pre-formed | Yes |
| DOT approved | No |
| Grade | Premium |
| Sold as | Kit |
Vehicle fitment
This kit names no vehicle. Compatibility is set by the 1-1/8 inch Remaster bore and the Remaster proportioning valve, so check those two items instead of a model year.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Count the banjo fittings on your master cylinder and proportioning valve before assembly, since the kit provides four banjo bolts. Install the copper crush washers supplied with the kit on each banjo fitting, and do not reuse washers from another connection. Bleed the brakes and check every banjo joint for leaks before driving.
What’s included
Two hard lines, four banjo bolts and eight copper crush washers.
Not included: the Remaster master cylinder and Remaster proportioning valve that these lines connect.










